Table of Contents
Advertisement
Available languages
Available languages
motor ventilation slots clean. Keep all working
controls free of dust. If the replacement of the
supply cord is necessary, this has to be done by the
manufacturer or his agent in order to avoid a safety
hazard.
STORAGE
Store the Blower/Vacuum and extension cord
indoors, in a cool dry location, out of reach of
children and animals.
12
12 AMP 3-in-1 Blow/Vac/Mulch
TROUBLE SHOOTING
Problems
Possible
Causes
The Blower/
The Blower/
Vacuum
Vacuum Tube
does not
is not attached
operate.
to the Motor
Housing.
Power cord is
not connected
to the power
source.
The leaf
collection bag is
not completely
installed.
The blower/
vacuum
switch is not
in line with the
corresponding
arrow on the
tool.
The Blower/
Debris blocking
Vacuum
in the Impeller
jammed or
clogged.
Debris blocking
in the Blower/
Vacuum Tube or
the connection
of the Leaf
Collection Bag
Corrective
Action
Attach the
Blower/Vacuum
Tube to the
Motor Housing.
Connect the
power cord to a
power source.
Install the
leaf collection
bag in place
completely.
Push the switch
to the proper
position.
Remove
clogged debris
from the
Impeller.
Remove
clogged debris
from the
Blower/Vacuum
Tube or the
connection
of the Leaf
Collection Bag.
EN
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the WG512 and is the answer not in the manual?
Questions and answers
How to remove blower vaacuum tube
To remove the vacuum tube from the Worx WG512 blower, follow these steps:
1. Unplug the tool – Ensure the blower is disconnected from the power source for safety.
2. Remove the collection bag – Squeeze the plastic attachment to detach the bag.
3. Switch to blower mode – If the vacuum is jammed, turn the selector from vacuum to blow.
4. Remove the plastic cover – Push the release button forward and pull off the cover.
These steps allow safe removal of the vacuum tube.
This answer is automatically generated
@Mr. Anderson blower cover not coming off after following these steps