Touchpad Mouse - Siemens SINUMERIK 840D sl Manual

2.2.4

Touchpad mouse

Operation
All of the mouse functions are based on 2-finger operation. The principle of operation of the OP
012 touchpad mouse is explained in the following table with reference to a classic 2-key mouse.
Action
Move the mouse pointer
Select
Execute
Drag, mark, move window
Open the context menu
Note
The touchpad cannot be used in environments with spray water or water jets. Operating the
touchpad in environments with dripping water is only possible with some restrictions.
Deactivate touchpad mouse
If necessary, you can disable the touchpad mouse. Depending on whether the OP012 is
connected to a TCU or a PCU, proceed as follows:
● TCU:
– Open the TCU menu "Modify Settings".
– Select the "No" option under the parameter "Enable touch capability".
Further information on this can be found in the Section "Diagnostics and Service" of the
"TCU 30.3" equipment manual.
● PCU: Disable the Windows control panel in the device manager.
Further information on this can be found in the Section "Activating/deactivating mice and
pointers" of the IHsl basic software and operating software (IM10) commissioning manual.
Operator panel front: OP 012
Manual, 05/2019, A5E36371591B AB
Touch event
Place your finger on the touchpad, keep it in
position and then move it.
Touch the touchpad once with your finger.
Touch the touchpad twice with your finger.
Touch the touchpad twice in succession,
keep finger in position and then move.
Touch the touchpad with two fingers, keep
briefly in place then lift one finger.
Note
A keyboard or mouse connected via USB is required to reactivate this option.
2.2 Operator control and display elements
Corresponds to
Move the mouse.
Click with the left mouse button
Double-click with left mouse button.
Click with the left mouse button and drag the
mouse.
Click with the right mouse button.
Description
17