FortiManager Server LED Indicators
LED
State
Green
Power
Off
Amber
Flashing
All Ports
Green
Off
Checking the Package Contents
LCD Panel
Control
Buttons
Connector
Port 1
Port 2
CONSOLE
Connecting
Connect the FortiManager System to a power outlet and to the internal and external networks.
•
Place the unit on a stable surface. It requires 1.5 inches (3.75 cm) clearance above and
on each side to allow for cooling.
•
Alternatively, Mount the unit in a standard 19-inch rack. The FortiManager 400 system
requires 1 U of vertical space in the rack.
•
Connect the network cable to interface 1.
To power up the FortiManager Server, connect the power cables to the power outlets.
After a few seconds, SYSTEM STARTING appears on the LCD. The menu selections appear
when the unit is up and running.
If you connect only one power source, an audible alarm sounds to indicate a failed power
supply. To stop this alarm, press the red alarm cancel button on the rear panel next to the
power supply inputs.
Planning the Configuration
The FortiManager System is an integrated management and monitoring tool that consists of
one or more FortiManager Servers and managed FortiGate and FortiAnalyzer devices.
The FortiManager Server manages communication between FortiGate devices, and a
FortiAnalyzer device. The FortiManager Server stores and manages all FortiGate device
configurations. It can also act as an on-site FDN server for the FortiGate devices to down-
load virus and attack signatures, and to use the web filtering and antispam service. The
FortiManager Server can also connect to a FortiAnalyzer unit for managing and monitoring
logs and reports for all managed FortiGate devices.
Factory Defaults
User name:
Administrator Account
Password:
IP:
Port 1
Netmask:
Management Access:
IP:
Port 2
Netmask:
Management Access:
Description
The FortiManager Server unit is powered on.
The FortiManager Server unit is powered off.
The correct cable is in use and the connected equip-
ment has power.
Network activity at this interface.
The interface is connected at 1000 Mbps.
The interface is connected at 100 Mbps.
Front
CONSOLE
1
2
PWE
Power
Serial
Port
Light
Console
1 and 2
Type
Speed
Protocol
RJ-45
100/1000 Base-T
Ethernet
RJ-45
100/1000 Base-T
Ethernet
DB-9
9600 bps
RS-232 serial
admin
(none)
192.168.1.99
255.255.255.0
ping, https, http, ssh
0.0.0.0
0.0.0.0
© Copyright 2007 Fortinet Incorporated. All rights reserved.
Products mentioned in this document are trademarks or registered trade-
marks of their respective holders.
Regulatory Compliance
FCC Class A Part 15 CSA/CUS
13 July 2007
Back
Alarm Cancel Button
Description
Connection to the network
Connection to the network.
Optional connection to the management computer.
Provides access to the command line interface (CLI).
Optional null modem cable connects
to serial port on management computer
1
2
CONSOLE
FortiManager 3000
02-30005-0241-20070713
Ethernet Cables:
Orange - Crossover
Gray - Straight-through
DB-9 Console Cable
Power Connection
Power Cables (2)
Mounting Brackets (2)
Copyright 2006 Fortinet Incorporated. All rights reserved.
Trademarks
Products mentioned in this document are trademarks.
Documentation
CONSOLE
1
2
PWE
Straight-through Ethernet cable connects
to hub or switch on the network
Power cable connects to power outlet
PWE
Q u i c k S t a r t G u i d e
CONSOLE
1
2
PWE
FortiManager 3000
Need help?
Do you have a question about the FortiManager-3000 and is the answer not in the manual?
Questions and answers