When You Think Something Is Wrong With The Equipment; General Operations - Toshiba e-Studio2000AC Software Troubleshooting Manual

When You Think Something Is Wrong With the Equipment

0.
If you think there is something wrong with the equipment, check the following items.
 To see the functions of the equipment such as copy or print, refer to their operator's manuals (Copying Guide and
Printing Guide respectively).
 Checking the operations or procedures may help you solve the problems. When something is unclear in the
operation of the equipment or you think something is wrong with it, the operator's manual for the function you are
using will be helpful.
 General operations
Problem Description
The equipment does not
work at all.
No icons or signs are
displayed on the touch
panel.
(The MAIN POWER lamp, the
ON/OFF lamp and the
[ENERGY SAVER] button
light.)
No icons or signs are
displayed on the touch
panel.
(Only the MAIN POWER lamp
lights.)
The touch panel is dim.
The button does not
respond to my operation.
("Saving energy Press
START button" appears on
the touch panel.)
The button does not
respond to my operation.
(The MAIN POWER lamp, the
ON/OFF lamp and the
[ENERGY SAVER] button
light.)
The button does not
respond to my operation.
(Only the MAIN POWER lamp
lights.)
The button does not
respond to my operation. (A
job cannot be started even if
the [START] button is
pressed. The buttons on the
touch panel have been
grayed out (inoperable).)
76 When You Think Something Is Wrong With the Equipment
Cause
The main power switch is OFF.
The power cord is not securely
inserted into the outlet.
The equipment is in the Sleep
mode.
The power of the equipment is
not turned ON.
The equipment is in the Super
Sleep mode.
The contrast of the touch panel
is adjusted lower.
The equipment is in the energy
saving mode.
The equipment is in the Sleep
mode.
The power of the equipment is
not turned ON.
The equipment is in the Super
Sleep mode.
Invalid combination functions
are set.
Corrective Action
Turn the main power switch ON.
Insert the power cord into the outlet until it
comes to a stop.
Press the [ENERGY SAVER] button to recover from
the Sleep mode.
Refer to the Quick Start Guide.
Press and hold the [POWER] button until the ON/
OFF lamp lights.
Press and hold the [ENERGY SAVER] button until
the ON/OFF lamp lights to recover from the
Super Sleep mode.
Refer to the Quick Start Guide.
Adjust the contrast lighter.
Refer to the MFP Management Guide.
Press the [ENERGY SAVER] button to recover from
the energy saving mode.
Refer to the Quick Start Guide.
Press the [ENERGY SAVER] button to recover from
the Sleep mode.
Refer to the Quick Start Guide.
Press and hold the [POWER] button until the ON/
OFF lamp lights.
Press and hold the [ENERGY SAVER] button until
the ON/OFF lamp lights to recover from the
Super Sleep mode.
Refer to the Quick Start Guide.
Depending on the models, some functions
cannot be used in combination with other ones.