Turning The Fortigate Unit Power On And Off; Led Indicators Table - Fortinet FortiGate FortiGate-100 Installation Manual

Getting started

Turning the FortiGate unit power on and off

FortiGate-100 Installation Guide
Environmental specifications
• Operating temperature: 32 to 104°F (0 to 40°C)
• Storage temperature: -13 to 158°F (-25 to 70°C)
• Humidity: 5 to 95% non-condensing
To power on the FortiGate unit
1 Connect the AC adapter to the power connection at the back of the FortiGate-100 unit.
2 Connect the AC adapter to the power cable.
3 Connect the power cable to a power outlet.
The FortiGate-100 unit starts. The Power and Status LEDs are on. The Status LED
flashes while the FortiGate-100 unit is starting and remains lit when the system is
running.
Table 1: FortiGate-100 LED indicators
LED
Power
Status
Internal
External
DMZ
(front)
Internal
External
DMZ
interfaces
(back)
To power off the FortiGate unit
Always shut down the FortiGate operating system properly before turning off the
power switch.
1 From the web-based manager, go to System > Maintenance > ShutDown, select
Shut Down and select Apply, or from the CLI, enter:
execute shutdown
2 Disconnect the power supply.
State Description
Green The FortiGate unit is powered on.
Off The FortiGate unit is powered off.
Flashing The FortiGate unit is starting up.
Green The FortiGate unit is running normally.
Off The FortiGate unit is powered off.
Green The correct cable is in use, and the connected equipment has
power.
Flashing Network activity at this interface.
green
Off No link established.
Green The correct cable is in use, and the connected equipment has
power.
Flashing Network activity at this interface.
amber
Off No link established.
01-28004-0019-20040830
13