System Interface; Handlebar Remote; Support Modes - Specialized Turbo LEVO FSR 6FATTIE User Manual

The handlebar remote is included on all LEVO/KENEVO models (fig.4) and controls the level of motor support.
4
WALK-ASSIST
TURBO BOOST BUTTON: Automatically changes to TURBO mode regardless of the mode the bike is in.
„
+ BUTTON: Increases the amount of support.
„
- BUTTON: Decreases the amount of support.
„
WALK-ASSIST BUTTON: Pressing and holding activates the walk-assist mode. This provides motor assist at
„
3.7 mph / 6 km/h to help push the bike up hills when walking.
The LEVO/KENEVO motor support is available
in three different drive settings - TURBO, TRAIL
and ECO.
TURBO MODE: The motor, while pedaling,
„
provides maximum (100%) support.
TRAIL MODE: The motor, while pedaling,
„
provides 50% support (default).
ECO MODE: The motor, while pedaling,
„
provides 20% (default).
The various modes (TURBO, TRAIL and ECO) are
managed using the +/- buttons on the Trail Display,
located on the side of the battery (fig.5) or on the
remote (fig.4). In addition, the drive system can
be controlled through a variety of devices (Mission
Control App or select LEV-supported computers)
by being able to access additional control features.
To switch into a different support mode, press the + or - button on the battery, app or computer. After reaching the
strongest or weakest mode, the system will not continue to switch. To reduce from TURBO to TRAIL to ECO, you
have to press the - button. To increase from ECO to TRAIL to TURBO, you have to press the + button.
9

7. SYSTEM INTERFACE

7.1. HANDLEBAR REMOTE

7.2. SUPPORT MODES

5
POWER
- : TRAIL OR ECO
TURBO BOOST
+ : TRAIL OR TURBO