Sony BRAVIA XBR-75X940E Reference Manual page 5

2
Secure the TV to the Stand.
Use the optional hardware listed as follows (not
supplied):
• M4 machine screws (screwed into the TV's stand neck).
• A screw or similar (attach it to the Stand).
• Rope or chain (strong enough to support the weight of
the TV). Make sure that there is no excess slack in the
rope or chain.
M4 machine screw
(not supplied)
Rope or chain
(not supplied)
Screw hole on the stand neck
Screw (not
supplied)
The length of the M4 machine screw differs depending
on the rope or chain diameter. Please see below
illustration.
4 mm - 7 mm
TV's stand neck
Screw (M4)
Rope or chain
3
Anchor the TV to the wall by using bolts, wall anchor and
chain (or rope).
Wall-mount holes
M6 eye bolts (not supplied)
Please see below illustration for M6 eye bolt length.
8 mm - 12 mm
TV's rear cover
Note
• Your TV is shipped with screws attached to the rear of the
TV depending on the TV model. (They are fastened in the
screw holes for wall mounting.) Be sure to remove the
upper two screws prior to anchoring the TV to a wall.
• Securing the TV to the Stand without securing the TV and
the Stand to the wall provides minimum protection
against the TV toppling over. For further protection, be
sure to follow the three measures recommended.
Rope or
chain (not
supplied)
Wall-anchor
(not supplied)
M6 eye bolt
5
US
US