Download Print this page

Philips BT721 Series Manual page 2

Hide thumbs Also See for BT721 Series:

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
Electromagnetic fields (EMF)
-
This Philips appliance complies with all
applicable standards and regulations regarding
exposure to electromagnetic fields.
General
-
The appliance is suitable for mains voltages
ranging from 100 to 240 volts.
-
The supply unit transforms 100-240 volts to a
safe low voltage of less than 24 volts.
Display
Battery status indications
When the battery is almost empty, the battery
charge indicator flashes orange (Fig. 3).
When the appliance is charging, the battery charge
indicator flashes white (Fig. 4).
When the battery is fully charged, the battery
charge indicator lights up white continuously (Fig.
5).
Note: The lights switch off automatically after
30 minutes.
Hair length indications
The selected hair length setting will light up on the
front of the handle when you select the desired
length setting with the zoom wheel (Fig. 6).
Charging
Charging takes approx. 1 hour. Charge the appliance
before you use it for the first time and when the
display indicates that the battery is almost empty.
1
Make sure the appliance is switched off.
2 Put the adapter in the wall socket and put the
small plug in the appliance (Fig. 7).
3 After charging, remove the adapter from the wall
socket and pull the small plug out of the appliance.
When the appliance is fully charged, it has a
cordless operating time of up to 75 minutes.
Using the appliance
Note: This appliance can be used without cord
or directly from the power outlet.
You can use this appliance for a stubble and
a short beard. This appliance has an integrated
vacuum system that catches cut beard hair for
a less mess trimming experience.
The vacuum system is activated automatically as
soon as you switch on the appliance.
Note: Switch off and clean the appliance after
each use.
Switching the appliance on and off
Press the on/off button once to switch the
appliance on or off (Fig. 8).
Trimming without comb
-
You can use the appliance without beard and
stubble comb to trim hair close to the skin or
to contour the neckline and sideburns. To trim
hair close to the skin, place the flat side of the
trimming head against your skin and make
strokes in the desired direction (Fig. 9).
-
For contouring hold the trimming head
perpendicular to the skin and move the
trimming head upwards or downwards with
gentle pressure (Fig. 10).
-
You can use the precision trimmer to create
fine lines and contours around your facial style,
close to the skin (Fig. 11). Simply pull the cutting
element straight off (Fig. 12) and insert the
precision trimmer (Fig. 13).
Trimming with comb
Note: When you trim for the first time, start at
the highest length setting to familiarise yourself
with the appliance.
-
You can use the beard and stubble comb
attached to the cutting element to groom your
beard and moustache in your preferred style. For
the beard and stubble comb, you can turn the
zoom wheel to choose from 20 length settings
ranging from 0.5mm to 10mm in steps of 0.5mm
(Fig. 6).
-
You can use the precision trimmer with a detail
comb attached for precision trimming of your
sideburns, moustache or beard (Fig. 14).
Note: Switch off and clean the appliance after
each use.
1
Attach the detail comb (Fig. 15) or the beard
and stubble comb onto the appliance (Fig. 16).
2 Switch on the appliance.
3 To trim most effectively, move the appliance
against the hair growth direction (Fig. 17). Make
sure that the surface of the comb always stays
in contact with the skin.
Cleaning and maintenance
Cleaning the appliance
Note: Only the cutting element and the comb
can be cleaned with water.
We advise you to empty the hair-collection chamber
after each trimming session. When you trim long,
dense beards, it may also be necessary to empty the
hair-collection chamber during the trimming session
in order to maintain optimal suction performance.
1
Switch off the appliance and disconnect it from
the power outlet.
2 Wipe the housing of the appliance with a dry
cloth.
3 Remove the comb (Fig. 18) and clean it with the
cleaning brush and/or rinse it under the tap (Fig. 19).
4 Remove the cutting element and clean it under
the tap (Fig. 20). Shake off excess water and
leave to dry completely.
Caution: Never dry the cutting element with
a towel or tissue, as this may damage the
trimming teeth.
5 Shake and/or brush out the hairs that have
collected in the hair chamber (Fig. 21).
6 After cleaning, reattach the cutting element
(Fig. 22) and comb (Fig. 16) to the appliance.
Recycling
-
This symbol means that this product shall not
be disposed of with normal household waste
(2012/19/EU) (Fig. 23).
-
This symbol means that this product contains a
built-in rechargeable battery which shall not be
disposed of with normal household waste
(Fig. 24) (2006/66/EC). We strongly advise you
to take your product to an official collection
point or a Philips service centre to have a
professional remove the rechargeable battery.
-
Follow your country's rules for the separate
collection of electrical and electronic products
and rechargeable batteries. Correct disposal
helps prevent negative consequences for the
environment and human health.
Guarantee and support
If you need information or support, please visit
www.philips.com/support or read the separate
worldwide guarantee leaflet.
DANSK
Generel beskrivelse (fig. 1)
1
Skærenhed
2 Sugesystem
3 Længdeindstillinger
4 Zoomhjul
5 On/off-knap
6 Batteristatusindikator
7 Etui
8 Rensebørste
9 Lille stik
10 Strømforsyningsenhed (adapter)
11 Præcisionstrimmer
12 Præcisionskam 3 mm (M)
13 Skæg- og stubbekam
Vigtige
sikkerhedsoplysninger
Læs disse vigtige oplysninger
omhyggeligt igennem, inden
apparatet og tilbehøret tages i
brug, og gem dem til eventuel
senere brug. Det medfølgende
tilbehør kan variere for
forskellige produkter.
Fare
- Hold Strømforsyningsenheden
tør (fig. 2).
Advarsel
- Strømforsyningsenheden
indeholder en
transformator. Klip ikke
strømforsyningsenheden
af og udskift den med et
andet stik, da dette vil føre til
farlige situationer.
- Brug kun den medfølgende
strømforsyningsenhed
(HQ8505) ved opladning af
apparatet.
- Dette apparat må bruges af
børn fra 8 år og opefter og
personer med reducerede
fysiske, sensoriske eller
mentale evner eller
manglende erfaring og viden,
hvis de er blevet instrueret
i sikker brug af apparatet
og forstår de medfølgende
risici. Lad ikke børn lege
med apparatet. Rengøring
og vedligeholdelse må ikke
foretages af børn uden
opsyn.
- Kontroller altid apparatet,
inden du anvender det.
Anvend ikke apparatet, hvis
det er beskadiget, da dette
kan forårsage personskade.
Udskift altid en beskadiget
del med en tilsvarende
original type.
- Apparatet må ikke åbnes i
forbindelse med udskiftning
af det genopladelige batteri.

Advertisement

loading