Sony SHAKE-X70D Operating Instructions Manual page 64

The system does not turn off even
when the TV is turned off.
Check the setting of [HDMI
• •
SETUP] – [STANDBY LINKED TO TV]
(page 35).
To turn the system off
automatically regardless of the
input when you turn off the TV, set
[STANDBY LINKED TO TV] to [ON].
The TV must support the Control
for HDMI function (page 47).
For details, refer to the operating
instructions of your TV.
No TV sound is output from the
system.
Check the type and connection of
• •
the HDMI cable or audio cable that
is connected to the system and
the TV (page 21).
If your TV is compatible with
• •
Audio Return Channel, make
sure the system is connected to
an ARC-compatible HDMI IN jack
of the TV (page 21). If sound
is still not output or if sound is
interrupted, connect an audio
cable (not supplied) and press
SETUP, then set [HDMI SETUP] –
[AUDIO RETURN CHANNEL] to
[OFF] (page 35).
If your TV is not compatible with
• •
Audio Return Channel, TV sound
will not be output from the system
even if the system is connected to
the TV's HDMI IN jack. To output TV
sound from the system, connect
an audio cable (not supplied)
(page 22).
Change the function of the system
• •
to "TV" (page 22).
Increase the volume on the
• •
system.
64
GB
Depending on the order in which
• •
you connect the TV and the
system, the system may be muted
and "MUTING" lights up on the
display of the unit. If this happens,
turn on the TV first, then the
system.
Set the speakers setting of the TV
• •
(BRAVIA) to Audio System. Refer to
the operating instructions of your
TV on how to set the TV.
The sound is output from both the
system and the TV.
Mute the sound of the system or
• •
the TV.
Change the speaker output on the
• •
TV to TV speaker or Audio System.
The Control for HDMI function
does not work properly.
Check the connection with the
• •
system (page 17).
Enable the Control for HDMI
• •
function on the TV. For details,
refer to the operating instructions
of your TV.
Wait a while, then try again. If you
• •
unplug the system, it will take
a while before operations can
be made. Wait for 15 seconds or
longer, then try again.
Make sure the TV connected to
• •
the system support the Control for
HDMI function.
The type and number of devices
• •
that can be controlled by the
Control for HDMI function is
restricted by the HDMI CEC
standard as follows:
•
— Recording devices (Blu-ray Disc
recorder, DVD recorder, etc.): up
to 3 devices
•
— Playback devices (Blu-ray Disc
Player, DVD player, etc.): up to
3 devices (this system uses one
of them)