Toshiba e-STUDIO 2000AC Copying Manual page 39

2.HOW TO MAKE COPIES
4 Key in the dimension.
Press [Length] or [Width] and enter the value.
Width
Length
To call up the dimension data registered previously, press the desired button from [Memory 1] to [Memory 4], and
then press [OK].
To register dimension data into the memory, see the following page:
 P.47 "Registering non-standard size in the memory"
Select other copy modes as required, and then press the [START] button on the control panel.
5
Bypass Copying 39