Table of Contents
Advertisement
2. Insert the KeyChoice key into the switch (Fig. 6).
1
Figure 6
1. KeyChoice switch
3. Turn the KeyChoice key.
A red light on the front console (Fig. 7) turns on,
indicating that the interlock is disabled.
1
Figure 7
1. Operating-in-reverse light
4. Shift into reverse and complete your task.
5. Stop the PTO, which will turn off the red light on the
console, to activate the interlock.
6. Remove the KeyChoice key and put it in a safe place
out of reach of children.
Indicator Control Module
The indicator control module (Fig. 8) contains lights for:
Operating in reverse
Power take off (PTO)
Hourmeter
1
1. Power take off (PTO)
2. Hourmeter
m–4220
Following are the conditions when indicator lights will be
on. At other times the lights should be off.
Operating in Reverse
The Operating–in–Reverse light will illuminate whenever
the KeyChoice switch is used to deactivate the
operating-in-reverse interlock. It is a reminder that the
interlock system is deactivated. The light goes out
whenever the power take off (PTO) is disengaged or the
engine is shut off.
PTO (Power Take Off)
The PTO (power take off) light will be on when the
m–6519
ignition key is in the run or lights positions and the PTO
(power take off) is engaged on. When this light is on it is
a reminder; the starter will not crank and turn off the PTO
before getting off.
Hourmeter
The hourmeter records the number of hours the engine has
operated (Fig. 8). It is turned on when the ignition switch
is in the run or lights positions. Use the times for
scheduling regular maintenance.
Driving Forward or Backward
The throttle control regulates the engine speed as
measured in rpm (revolutions per minute). Place the
throttle control in the fast position for best performance.
To go forward or backward, release the parking brake:
refer to Releasing the Parking Brake, page 15. Place your
foot on the traction control pedal and slowly press on the
top of the traction control pedal to move forward or on the
bottom of the traction control pedal to move backward
(Fig. 9). The farther you move the traction control pedal
in either direction, the faster the machine will move in
that direction.
18
3
2
m–6519
Figure 8
3. Operating-in-Reverse
Advertisement
Table of Contents
