Hp-Gl/2 Problems; With Hp-Gl/2, Printing Is Misaligned; Lines Or Images Are Missing In Printed Hp-Gl/2 Jobs; Lines Are Printed Too Thick Or Thin In Hp-Gl/2 Print Jobs - Canon iPF785 User Manual

iPF785

HP-GL/2 problems

HP-GL/2 problems

With HP-GL/2, printing is misaligned ............................................................................................................................. 649

Lines or images are missing in printed HP-GL/2 jobs. ........................................................................................... 649

Lines are printed too thick or thin in HP-GL/2 print jobs ..................................................................................... 649

HP-GL/2 jobs are printed in monochrome (or color) ............................................................................................. 650
Printed colors of lines are inaccurate during HP-GL/2 printing ........................................................................ 650
HP-GL/2 jobs are printed 6 mm larger than specified .......................................................................................... 650
HP-GL/2 jobs are printed at maximum size, even if a standard size is specified ...................................... 650
HP-GL/2 printing takes a long time ................................................................................................................................ 650
The printer stops when printing a HP-GL/2 job (the carriage stops moving) ............................................. 650
With HP-GL/2, printing is misaligned
With HP-GL/2, printing is misaligned
Cause
The plotter origin is incorrect.
The Margin setting in the Control Panel menu is in-
correct.
Lines or images are missing in printed HP-GL/2 jobs.
Lines or images are missing in printed HP-GL/2 jobs.
Cause
The memory is full.
An HP-GL/2 command not supported by this printer was
received.
The printer has received print data that includes HP RTL
commands when Auto Rotate is On in the Control Panel
menu.
The plotter origin is incorrect.
Oversize in the Control Panel menu is set to Off.
Lines are printed too thick or thin in HP-GL/2 print jobs
Lines are printed too thick or thin in HP-GL/2 print jobs
Cause
The Width setting in the Control Panel menu
is incorrect.
ThickenFineLines in the Control Panel menu
is set to Off.
The Ln wdth correct setting in the Control
Panel menu is incorrect.
User's Guide
Check the printing commands.
Set Detect img size to Command priority or Detected size in the Control Pan-
el menu.
Adjust the Margin setting values in the Control Panel menu.
Check the size of the data in the print job.
Check the print job and settings.
In the Control Panel, set Auto Rotate to Off and print again.
(See "Menu Settings.")
Set Detect img size to Command priority or Detected size in the Control
Panel menu.
(See "Menu Settings.")
Set Oversize to On in the Control Panel menu.
(See "Menu Settings.")
Change the Width setting configured in Pen no. of the Palette A or Palette B selected
in the Control Panel menu.
(See "Menu Settings.")
P.457
➔
If fine lines are printed faintly, setting ThickenFineLines to On will print the lines more
distinctly.
(See "Menu Settings.")
P.457
➔
Change the Ln wdth correct setting in the Control Panel menu.
(See "Menu Settings.")
P.457
➔
With HP-GL/2, printing is misaligned
Corrective Action
Corrective Action
P.457
➔
P.457
➔
P.457
➔
Corrective Action
649