Using The Mid-Size Weight - Toro 30094 Operator's Manual

Using the Mid-Size Weight

Weights are installed on certain mowers to improve
balance and improve performance. The weights can be
moved or removed to create optimized performance
under different mowing conditions and for operator
preference (Figure 22 or Figure 23).
The following table indicates the position of the weight
as installed at the factory.
Mower Deck Size Number of weights
36 inches
40 inches
48 inches
52 inches
• Any rear weight must be removed when a
®
Tru-Track Sulky is installed.
• When a Tru-Track ®
are needed. Contact an Authorized Service Dealer
for the correct quantity of weights and placement.
The front end of the machine can rapidly rise
up when the mower is removed. This could
cause serious injury to you or bystanders.
Support the rear of the machine when removing
the mower form the carrier frame.
Position of the
install weight
none none
1 Front
2 Rear
3 Rear
Sulky is installed front weights
Installing the front weight.
1. Bolt
2. Washer
Installing the rear weight.
1. Nut
2. Weight
21
Figure 22
3. Weight
4. Nut
Figure 23
3. Washer
4. Bolt