Print Area - Canon imagePROGRAF iPF680 User Manual

Hide thumbs Also See for imagePROGRAF iPF680:

Table of Contents

For information on the ink the printer supports, see "Ink Tanks."

For information on the types of paper the printer supports, refer to the Paper Reference Guide. (See "Displaying the

Paper Reference Guide.")

Minimum paper length

Maximum printable length ( *1 )

Roll maximum outer diameter

Supported paper core inner diameter

Print area

*1: Varies depending on the operating system or application.

Roll Holder Set

*1: The stand that is included depends on the region where you purchased the printer.

A margin required by the printer is added with respect to the size of paper loaded in the printer. Except in borderless

printing, the actual printing area corresponds to the paper size minus the space for this margin.

User's Guide

Specification

For information on the paper widths the printer supports, see "Paper Sizes."

For details, see "Print Area."

Internal port

Full-speed (12 Mbps), high-speed (480 Mbps), bulk transfer

Series B (4-pin)

Internal port

IEEE 802.3 10Base-T,

IEEE 802.3u 100Base-TX/Auto-Negotiation,

IEEE 802.3ab 1000Base-T/Auto-Negotiation,

IEEE 802.3x Full Duplex

IEEE 802.3az EEE

SNMP (supports Canon-MIB), HTTP, TCP/IP (IPv4/IPv6)

203.2 mm (8.0 in)

279.4 mm (11.0 in)

18 m (19.7 yd)

1,600 mm (63.0 in)

0.07–0.8 mm (0.0028–0.031 in)

150 mm (6 in) or shorter

2 inches / 3 inches

Roll Holder Set RH2-26

Printer Stand ST-27