Do you have a question about the WMB 61021 MS and is the answer not in the manual?
Questions and answers
Helena kacířova
April 4, 2025
Nejde mi vytáhnout filtr
1 comments:
Mr. Anderson
April 4, 2025
To remove the filter from a Beko WMB 61021 MS washing machine:
1. Disconnect the washing machine from the power supply. 2. If the filter cover is a single piece, open it by pulling from both sides at the top. 3. Alternatively, gently press the lower part of the cover down using a tool with a thin plastic tip (do not use metal tools). 4. If the model has an emergency drain hose: - Pull out the hose and drain the water into a container. 5. Unscrew the pump filter counterclockwise. 6. Remove the filter and clean it thoroughly under running water. 7. Reinstall the filter and close the cover.
Need help?
Do you have a question about the WMB 61021 MS and is the answer not in the manual?
Questions and answers
Nejde mi vytáhnout filtr
To remove the filter from a Beko WMB 61021 MS washing machine:
1. Disconnect the washing machine from the power supply.
2. If the filter cover is a single piece, open it by pulling from both sides at the top.
3. Alternatively, gently press the lower part of the cover down using a tool with a thin plastic tip (do not use metal tools).
4. If the model has an emergency drain hose:
- Pull out the hose and drain the water into a container.
5. Unscrew the pump filter counterclockwise.
6. Remove the filter and clean it thoroughly under running water.
7. Reinstall the filter and close the cover.
This answer is automatically generated