Philips FWM583 Service Manual page 9

DISMANTLING INSTRUCTIONS
Dismantling of the CDC Module and Front Panel
1) Loosen 4 screws to remove the Cover Top of the set.
2) Loosen 2 screws to remove the Panel Left and 2 screws
to remove the Panel Right of the set.
3) Slide out the CDC Tray as shown in the diagram below with
the help of a flat head screw driver.
2-1
Sliding Out The CDC Tray
Dismantling of the CDC Module and Front Panel
4) Remove the Cover Tray CDC as indicated.
5) Loosen 2 screws A and 2 screws B to remove the CDC
Module as indicated.
6) Remove 2 screws at the bottom to separate the
Front Panel Assembly from the Plate Bottom .
2-1
Remove Cover Tray CDC
Front View CDC
Remove CDC Module