3D Basics; 3D Active Glasses; Pairing 3D Active Glasses - Samsung UE55F9000 User Manual

3D Basics

3D Active Glasses

Features
Samsung's SSG-5100GB 3D glasses enable you to view 3D images on your 3D TV. The Samsung 3D glasses
communicate with Samsung 3D TVs via the 2.4GHz RF band.
The Samsung 3D glasses are only compatible with Samsung D, E, and F series 3D TV's that were released in
✎
2011, 2012, and 2013. These 3D glasses cannot be connected to other Bluetooth devices.
Parts
For details on how to attach the glasses' arms and how to pair the glasses with the TV, refer to the separate 3D
glasses manual.
Replacing the Battery
If the red LED blinks every two seconds continually, replace the battery with a new one.
Insert the "+" side of the battery into the side marked with "+" in the battery compartment.
✎
To check the remaining battery capacity, refer to the pairing section in this manual.
✎
Pull the battery
cover downward

Pairing 3D Active Glasses

What is Pairing? Pairing is the process of connecting 3D glasses and a 3D TV so that the two devices can
✎
exchange data.
Ensure your Samsung TV and 3D glasses are no farther than 19.5 in (50 cm) apart from each other while pairing
✎
is in progress.
• Turning the glasses on
Press the power button briefly. The green LED is turned on for 3 seconds.
(Make sure that 3D is activated on the TV before using the 3D glasses.)
• Turning the glasses off
Press the power button briefly. The red LED is turned on for 3 seconds.
• Performing the pairing process
Turn the TV on and let it power up completely. Press and hold the Power button on the glasses. The green and the
red LEDs blink alternately for 2 seconds.
[UF9000-XU]BN68-05462K-01ENG.indb 21
Battery Cover
Open the battery Remove the
cover battery
English - 21
LED Indicator & Power Button
Liquid crystal shutter
Replace the Push the battery
battery cover downward
Close the battery
cover
2013-10-31 10:10:56