Sharp PN-80SC5 Operation Manual page 37

nDDC (plug and play)
The monitor supports the VESA DDC (Display Data Channel) standard.
DDC is a signal standard for plug and play between monitors and computers. Information about resolution and other parameters
is exchanged between the two. This function can be used if the computer supports DDC and it has been configured to detect
plug-and-play monitors.
There are several types of DDC, depending on the communication method used. This monitor supports DDC2B.
nCompatible signal timing (PC)
Screen resolution
VESA 640 × 480
800 × 600
1024 × 768
1152 × 864
1280 × 768
1280 × 960
1280 × 1024
1360 × 768
1400 × 1050
1600 × 1200 *
1920 × 1200 *
Wide 1280 × 720
1920 × 1080
Sun * 4 1024 × 768
*1 Settings other than Dot by Dot/UNDERSCAN will result in partial display.
*2 When using this signal, use the remote control to operate the monitor. Operation using the buttons on the monitor is not possible.
*3 Dot by Dot produces the same display as WIDE.
*4 The frequency values for the Sun are reference values.
Hsync Vsync
31.5kHz
37.9kHz
37.5kHz
35.1kHz
37.9kHz
48.1kHz
46.9kHz
48.4kHz
56.5kHz
60.0kHz
67.5kHz
47.8kHz
60.3kHz
60.0kHz
64.0kHz
80.0kHz
47.7kHz
65.3kHz
3 75.0kHz
3 74.0kHz
44.7kHz
67.5kHz
48.3kHz
56.6kHz
Dot frequency
60Hz 25.175MHz
31.5MHz
72Hz
75Hz 31.5MHz
56Hz 36.0MHz
60Hz 40.0MHz
72Hz 50.0MHz
75Hz 49.5MHz
60Hz 65.0MHz
70Hz 75.0MHz
75Hz 78.75MHz
75Hz 108.0MHz
60Hz 79.5MHz
102.25MHz
75Hz
60Hz 108.0MHz
60Hz 108.0MHz
75Hz 135.0MHz
60Hz 85.5MHz
60Hz 121.75MHz
60Hz 162.0MHz
60Hz 154.0MHz
60Hz 74.4MHz
60Hz 148.5MHz
60Hz 64.13MHz
74.25MHz
70Hz
Specifications
Digital HDMI Analog (D-sub)
Yes * 1 * 2 Yes
Yes
Yes
Yes Yes
Yes Yes
Yes
Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes
Yes
Yes -
Yes Yes
Yes
Yes
Yes Yes
Yes -
- Yes
- Yes
Yes Yes
Yes Yes
Yes Yes
Yes
Yes
37
E