Location Requirements - Haier HWR05XCR-L User & Care Manual

LOCATION REQUIREMENTS

IMPORTANT:
O s b r e
conditioner will be installed. Make sure you have everything necessary for correct
installation.
THE LOCATION SHOULD PROVIDE:
• A grounded electrical outlet within 6 ft. (183 cm) of where the power supply cord exits the air
conditioner.
NOTE: o
D not use an extension cord, plug adapter, surge protector or multi-outlet adapter.
• Free movement of air in the room to be cooled.
• A large enough window opening for the air conditioner. (See Fig.2)
• The air conditioner must not be installed in a through-the-wall sleeve or in a wall. It can only be
installed in a double-hung window.
NOTE: The outside cabinet louvers and air discharge must not be obstructed by bushes, trees,
etc. Air must be able to pass freely through the cabinet louvers. (See Fig.1)
Fig. 1
CABINET LOUVERS
WINDOW INSTALLATION
Window opening measurements:
HWR05XCR-L HWR06XCR-L
A. Width 21-7/8" - 36"
B. Height 13-3/8"
PAGE 6
e v all governing codes and ordinances. Check the location where the air
WIDTH
24-1/2" - 36"
13-3/8"
INSTALLATION REQUIREMENTS
Fig. 2
AIR DISCHARGE
WIDTH
HWE08XCR-L
HWE12XCR-L
HWE10XCR-L
25" - 36-5/8" 26-1/8" - 37-3/4"
14-9/16" 14-9/16"
B-HEIGHT
A-WIDTH