To Start Sewing; Stitch Length Dial Instruction - AEG 3200 User Manual

TO START SEWING

Important hints:
1. Raise the take-up lever to its highest position before starting and after stopping
sewing.
2. Hold both threads about 10 cms to the rear of the machine for the first two or three
stitches.
3. Sufficient fabric should be placed under needle before lowering the presser foot.
4. Depress foot/speed control and start to sew.
5. Test the machine stitches on a scrap of fabric you plan to use, adjusting the machine
for the length of the stitch and tension suitable to your fabric.
6. Separate the machine from the power system if you leave it unsupervised.
7. When sewing the stretch stitches (
medium speed (do not press the foot controller to the bottom) & do not use fast speed
to sew enabling can get a good sewing result of stretch stitches.
Attention:
1. When turning the balance wheel manually, always turn it toward you.
2. Guide the cloth gently with your hand.
3. To prevent breaking needles, always raise the needle out of the fabric when you stop
sewing.

STITCH LENGTH DIAL INSTRUCTION

1. When you select 17 to 32 to sew, the stitch length dial has to operate in "Figure 1"
position (it is a larger paragraph position for operation) in order to get such as the
correct pattern in accurately.
Figure 1
- 21 -
), please use slow to