Reset Functions; How To Reset The Machine - Brother DCP-9015CDW User Manual

Reset functions

The following reset functions are available:
1 Network
You can reset the internal print server
back to its default factory settings such as
the password and IP address information.
2 All Settings
You can reset all the machine's settings
back to the factory default.
Brother strongly recommends you
perform this operation when you dispose
of the machine.
NOTE
(DCP-9020CDW)
Unplug the interface cable before you
choose Network or All Settings.

How to reset the machine

B
a
Press
b
Press All Settings.
c
Swipe up or down, or press a or b to
display Initial Setup.
d
Press Initial Setup.
e
Press Reset.
f
Press Network or All Settings to
choose the reset function you want.
g
Do one of the following;
 To reset the settings, press Yes and
go to step h.
 To exit without making changes,
press No.
h
You will be asked to reboot the machine.
Do one of the following;
 To reboot the machine press Yes for
2 seconds. The machine will begin
the reboot.
To exit without rebooting the

machine, press No.
NOTE
• If you do not reboot your machine, the
reset will not complete and your settings
will remain unchanged.
• You can also reset the Network settings
by pressing
Network, Network Reset.
Troubleshooting
.
, All Settings,
B
B
119