Installing The Cooktop - GE PHP960 Installation Instructions Manual

INSTALLING THE COOKTOP

PROTECT SURFACE OF COOKTOP
1
Place a towel or tablecloth onto the countertop.
Lay the cooktop upside down onto the protected
surface.
Bottom of Cooktop
Cloth under Cooktop
INSTALL BAFFLE
2
Secure the baffle to the cooktop with screws.
NOTE: Do not install the baffle when the cooktop
is installed over a single oven.
Installation Instructions
8
ATTACH FOAM TAPE
3
Apply the foam tape around the outer edge of the
glass. Do not overlap the foam tape.
Bottom of Cooktop
Foam Tape
Cooktop
Glass
NOTE: On stainless steel models, apply foam tape
on the sides and rear.
INSTALL HOLD-DOWN BRACKETS
4
Start one screw through the bracket and into the
cooktop. (Both sides.) Do not tighten. Turn the
bracket inwards to avoid interference when
dropping the cooktop into the countertop.