Samsung WAM750 User Manual page 76

Symptom
HUB doesn't work properly
M7 doesn't work properly
Check
• Is the HUB plugged in?
• Is the LAN cable connected to
the wireless router and the HUB
properly?
• When the Hub is plugged in, do
the HUB's front indicators show
it's operating properly?
• Is the M7 plugged in?
• Does the M7's front LED indicator
remain red 5 minutes after turning
on?
4444 76
Remedy
• Plug in the HUB.
• Connect the LAN cable to the
ETHERNET SWITCH
on the back
of the HUB and to your wireless
router.
• Reset the HUB (see page 73).
Press here
• If you experience troubles with
connecting the HUB and M7, try
relocating the M7 so that the M7
is closer to the wireless router or
HUB.
• Plug in the M7.
• Check whether the Wi-Fi router
you're using had been certified for
Wi-Fi.
• Unplug the M7, plug it back in,
and then reconnect it to the router.
• Reset the M7 (see page 73).
Press here
• If used with a HUB
- Make sure the smart device and
the HUB are connected to the
same Wi-Fi network.
- Make sure the HUB's indicator
LED's show that it is working
correctly. (See page 19, item 3.)
Press here
- If the problem persists, reset the
HUB (see page 73).
- Unplug, then plug in the HUB.
Then, unplug and plug in the
M7.
- If you experience troubles with
connecting the HUB and M7,
try relocating the M7 so that
the M7 is closer to the wireless
router or HUB.
Press here