Table of Contents
Advertisement
c)
Press menu "Connect", a dialog box "Device Type is XXX (XXX is corresponding type of SPI
Flash)" will pop up, that is, connection has been successful, please refer to Fig. 3; if connection
is failed, press the first menu "Device" to select SPI Flash type manually, then press menu
"Connect" again;
d)
Press menu "Read", select the burning file, such as "MERGE.bin", please refer to Fig. 4;
e)
Press menu "Auto", tick options "All chip", "program" and relative option switches, please refer
to Fig.5, press key "Run" to begin burning;
Fig. 2 Write-protect setup
Fig. 3 Successful connection
Fig. 4 Burning file
Advertisement
Table of Contents
