7. Check the correct position of the UI-SHIELD.
9. Avoid damaging the switch when inserting the ENGINE
MODULE into the B-COVER.
11. Tighten the four screws to the torque of 21Ncm in the
order shown.
Page
17
(18)
CONFIDENTIAL
Copyright © 2007 NOKIA. All rights reserved.
8. Always use a new FLEX SHIELDING LID ASSY and fit it as shown.
10. Ensure that all spring contacts are in a good condition before
fitting the A-COVER.
12. Insert the two new screws and tighten them to the torque of
21Ncm in the order shown.
7500 RM-249 / RM250
Service Manual Level 1&2
ISSUE 2