Nokia 6260 Service Manual page 12

nokia
C P
ONNECTING EOPLE
NMP/CMO Sales and Marketing Customer Care EMEA
Technical Services, Repair Concepts
9.) The same procedure on the left side of the FRAME.
11.) Take away the SIDE KEY with SRT-6.
13.) Now remove the ENGINE MODULE. First lift up the left
side (near SIM, MMC connector) with SRT-6 and then...
15.) The ENGINE MODULE is connected to the LOWER BLOCK
via the HINGE FLEX CONNECTOR. Be careful when placing
the ENGINE MODULE on the B1 COVER.
Service Manual 6260 Level 1&2
PAGE 12 (24)
CONFIDENTIAL
10.) Now, remove the FRAME.
12.) Use the B1 COVER as a support for ENGINE MODULE to
avoid damaging of the HINGE FLEX.
14.) ...the right side near by the CAMERA MODULE. Be
careful not to touch the CAMERA MODULE.
16.) Open the CAMERA CONNECTOR by using the SS-34 and
remove the CAMERA MODULE.
Copyright 2004 © Nokia Corporation
Approved 1.0
DJk
03.09.2004