Table of Contents
Advertisement
Step 4.
Using a flat head crow bar push into the gap in-between the batter and batter cover, then prise up
the cover gently as shown.
Step 5.
Remove the two screws that secure the battery to the rear cover, then lift up the battery pack as
shown. Disconnect the power cable from the connector.
Step 6.
To install a new battery:
a.
Connect the new power cable to the connector.
b.
Line up the holes on the new battery with mounting holes on the rear cover, then place the
new battery into position.
c.
Secure the new battery to the rear cover with the two screws.
d.
Reattach the battery cover.
Removing the rear cover
Note: Turn off the computer and wait 3 to 5 minutes to let it cool down before removing the rear cover.
.
Chapter 8
Replacing hardware
29
Advertisement
Table of Contents
