Basic Connection - Panasonic Viera TC-L37D2 Operating Instructions Manual

Attaching the pedestal to TV
■ ■
Assembling the pedestal Set-up
Fix securely with assembly Fix securely with assembly
screws A . (Total 4 screws) screws . (Total 4 screws)
Tighten screws firmly. Tighten screws firmly.
A
Bracket
Front
Base
(Image: TBLX0164)
Foam mat or thick
soft cloth
Place the TV at a comfortable distance for viewing. Avoid placing it where sunlight or other bright light (including reflections) will
fall on the screen. Use of some types of fluorescent lighting can reduce remote control transmitter range. Adequate ventilation
is essential to prevent an internal component failure. Keep away from areas of excessive heat or moisture.
Adjust the LCD panel
to your desired angle.
Note
Ensure that the pedestal does not hang over the edge of the base even if the TV swivels to the full rotation range.
Do not place any objects or hands within the full rotation range.
WARNING
Do not disassemble or modify the pedestal.
Otherwise the TV may fall over and become damaged, and personal injury may result.
Caution
Do not use any other TV and displays.
Otherwise the TV may fall over and become damaged, and personal injury may result.
Do not use the pedestal if it becomes warped or physically damaged.
If you use the pedestal when it is physically damaged, personal injury may result. Contact your nearest Panasonic
Dealer immediately.
During set-up, make sure that all screws are securely tightened.
If sufficient care is not taken to ensure screws are properly tightened during assembly, the pedestal will not be strong
enough to support the TV, and it might fall over and become damaged, and personal injury may result.
Reference of connection
Antenna terminal Pin terminals
red
Firmly tighten by hand.
8
Accessories
Assembly screws
(4 of each)
A
B
B
B
Bracket (1)
Base (1)
Location
15°
b
15°
a
(View from above)
HDMI terminal
blue green
green
Match colors of plugs and terminals. Insert firmly.
Insert firmly.

Basic Connection

Example
TV
XSS5+15FNK
M5 x 15
XYN4+F12FJK
M4 × 12
Cable TV
TC-L37D2
a: 15.8 " (399 mm)
b: 11.1 "(280 mm)
TC-L42D2
a: 17.8 " (450 mm)
b: 12.2 " (309 mm)
Cable
•
You need to subscribe to a cable TV service to enjoy viewing their programming.
•
You can enjoy high-definition programming by subscribing to a high-definition cable service.
The connection for high-definition can be done with the use of an HDMI or Component Video cable. (p. 10)
•
To view high-definition programming select the correct video input. (p. 24)
Note
Not all cables and external equipment shown in this book are supplied with the TV.
For more details on the external equipment's connections, please refer to the operating manuals for the equipment.
For additional assistance, visit us at: www.panasonic.com
Connecting Antenna (To watch TV)
VHF/UHF Antenna
•
NTSC (National Television System Committee):
VHF/UHF Antenna
Conventional broadcasting
•
ATSC (Advanced Television Systems Committee):
Digital TV Standards include digital high-definition television (HDTV),
Cable TV
standard-definition television (SDTV), data broadcasting, multi-
channel surround-sound audio and interactive television.
To connect the antenna terminal
VHF/UHF Antenna
or
Back of the TV
www.panasonic.ca
AC 110-127 V
60 Hz
Power Cord
(Connect after all the
other connections.)
9