Table of Contents
Advertisement
10.1.3. Check Link
10.1.3.1. Base Unit
Cross Reference:
Power Supply Circuit/Reset Circuit (P.12)
Check the RF part (P.35)
Note:
*1 How to adjust +3.0V:
Execute the command "VDA"
Refer to Things to Do after Replacing IC or X'tal (P.51) for Base Unit.
*2 How to adjust the frequency of X501:
To see the frequency, execute the command "SFR", then check the TP_CKM (IC501-57pin).
To adjust frequency, send command "SFR
KX-TG4011LAT/KX-TG4012LAT/KX-TG4013LAT/KX-TGA403LAT
" until the frequency counter becomes13.824 MHZ±55HZ.
33
Advertisement
Table of Contents
