Usb - Play And Record - Panasonic SC-VKX60 Operating Instructions Manual

USB – Play and record
You can connect and play contents from your USB mass storage
device.
Preparation
Before you connect a USB mass storage device to the system, make
sure you do a backup of the data.
Do not use a USB extension cable. The unit cannot recognise USB
mass storage devices connected through a cable.
Basic playback
1
Decrease the volume and connect the USB mass storage
device to the USB port.
USB mass
storage device
(not included)
MUSIC PORT
2
Press [ 4 , USB] to start playback.
3
Press [MENU] to show the USB menu.
4
Press [ R / T ] to select an item and press [OK].
Refer to "Playing discs" ( Z 11 to 13) for other operations.
Compatible devices
• USB mass storage devices that support bulk-only transfer.
• USB mass storage devices that support USB 2.0 full speed.
Supported format
File format
Still pictures JPEG
Audio MP3
WMA
Video MPEG4
1 Some files cannot be played due to how the files were made.
For Panasonic D-Snap/DIGA
2
Note:
Maximum number of groups (folders)
Maximum number of contents (files)
Maximum characters in group or content name
• CBI (Control/Bulk/Interrupt) transfer is not supported.
• NTFS file system is not supported (only FAT 12/16/32 file system is
supported).
• Depending on the sector size, some contents can fail to work.
14
14
DVD/CD
4
FM/AM
MIC VOL
MIN
File extension
1 .JPG .jpg
.JPEG .jpeg
.MP3 .mp3
.WMA .wma
.ASF .asf
2
255
4000
28
Recording
Panasonic cannot be held responsible on the action of consumer
to record copyrighted contents which can cause copyright
infringement.
1
Select the source you want to record.
Disc:
1. Put in the disc.
2. Press [ 4 , DVD/CD] and then press [ 8 ] two times.
Record specified tracks ( Z 11, "Program playback").
Tape:
1. Press [TAPE].
2. Put in the cassette tape.
3. Press [ 4 , PLAY] to start playback.
Radio:
Tune in to the radio station ( Z 16).
Music port or AUX:
Connect and play the equipment ( Z 19).
Microphone:
Connect the microphone ( Z 18).
2
MAX Press [ 7 , USB] (main unit: [ 7 , USB REC]) to start recording.
MIC 1
The USB recording indicator blinks.
The name of the group that keeps the recording is shown.
3
Press [ 8 ] to stop recording.
"WRITING" is shown.
The recorded audio contents are kept in a group named "REC_DATA"
in the USB mass storage device.
USB
ROOT/REC _ DATA
AUX001
DISC001
FM001
FM002
REC _ DAT2
AUX003
OK
RETURN
Note:
• All recordings are in .mp3 format.
• A new group is added or made each time you do a recording.
• You cannot do recording or delete contents when you are in
"RESUME STOP" mode.
• You cannot do recording when you are using random playback
mode.
• Repeat playback mode is off during recording.
• Microphone input cannot be recorded during CD-DA to USB
recording.
• Do not disconnect the USB mass storage device or the AC mains
lead during recording.
Subgroup that
keeps MP3
contents recording
from data discs
( Z 15)