Table of Contents
Advertisement
Lenovo ideapad 2in1 14 Hardware Maintenance Manual
Figure 8. Removal steps of fan and heat sink assembly (continued)
Remove the heat sink module in the direction shown by arrow
.
2
Attention: Do not handle the heat sink assembly roughly. Improper handling
can cause distortion or deformation and imperfect contact with components.
When installing: Before you attach the fan assembly to the computer, apply
thermal grease, at an amount of 0.2 grams, to parts
a b
shown in the figure
above. Either too much or too little grease application can cause a thermal
problem due to imperfect contact with a component.
42
Advertisement
Table of Contents
