Network Settings - Sharp SX633 User Manual

Network Settings

Selecting a Service Automatically
Each time the power is turned on, your phone selects a service
automatically.
→
"Connectivity" "Network Settings"
Service"
1.
Select "Auto".
Selecting a Service Manually
→
"Connectivity" "Network Settings"
Service"
1.
Select "GSM".
Selecting a Network Automatically
Each time the power is turned on, your phone always tries to
connect to the preferred network.
If your phone is not connected to the network, you can perform
the following immediately to establish the preferred network
connection.
→
"Connectivity" "Network Settings"
→
Network" "Automatic"
Setting the Network Manually
→
"Connectivity" "Network Settings"
→
Network" "Manual"
1.
Select the desired network.
118 Connectivity
(M 12-2)
→
"Select
→
"Select
→
"Select
→
"Select
Adding a New Network
→
"Connectivity" "Network Settings"
→
Network" "Add New Network"
If there are no entries, press B and go to step 2.
If there is an entry, press B and perform the following steps.
1.
Select "Add".
2.
Enter the country code (up to 3 digits).
3.
Enter the network code (up to 3 digits).
4.
Enter a new network name (up to 25 characters).
5.
Select "Select network type".
6.
Select the desired network.
Editing the Preferred List
→
"Connectivity" "Network Settings"
→
Network" "Set Preferred"
1.
Select the name of the network you wish to edit.
2.
Select "Insert" to insert over the selected position, "Add
to end" to insert at the end or "Delete" to delete.
→
"Select
→
"Select