Lenovo ideapad 310 Hardware Maintenance Manual page 52

Lenovo ideapad 310-14IAP/ideapad 310-15IAP Hardware Mainte-
nance Manual
Figure 7. Removal steps of system board (continued)
Remove the system board in the direction shown by arrow
When installing: When attaching the system board to the base cover, adjust the
placement of the USB, HDMI, RJ-45 ports as shown in
that they are attached to the holes on the base cover as shown. Improper
placement of those jacks might cause a damage.
48
c
b
a
j
j .
, and make sure