Lenovo ideapad 110-14ISK Hardware Maintenance Manual page 47

Figure 5. Removal steps of hard disk drive (continued)
Detach the HDD connector in the direction shown by arrow 2. Remove the
hard disk drive from the slot in the direction shown by arrow 3.
When installing: Make sure that the HDD connector is attached firmly.
Remove the screws 4, then take out the metal frame.
Step Screw (quantity)
M3 × 3 mm, Phillips head, nylok-coated (4)
7
HDD BRK TO HDD
Lenovo ideapad 110-14ISK/ideapad 110-15ISK
c
b
d
d
d
d
Color Torque
Silver 3.0+/-0.3 kgf/cm
43