Table of Contents
Advertisement
INSTALLATION
NAME OF EACH PART OF THE PROJECTOR
FRONT OF THE PROJECTOR
PROJECTION LENS
FEET LOCK
LATCH
REMOVABLE
LENS COVER
REAR OF THE PROJECTOR
EXHAUST VENT
CAUTION HOT AIR!
Air blown from the exhaust vent is hot.
Observe the following when handling your
projector or choosing a location to install it.
Keep heat-sensitive objects away from the
exhaust port.
If you set the projector on top of a metallic
surface, the surface will become hot because of
the hot air exhaust. Be careful when handling.
Do not touch the cabinet near to the exhaust
vent area, and especially screws and metallic
parts. These parts will become hot while the
projector is used.
BOTTOM OF THE PROJECTOR
6
SPEAKERS
LAMP
COVER
AIR INTAKE VENT
FEET LOCK
LATCH
INFRARED
REMOTE
RECEIVER
MAIN ON/OFF
SWITCH
ADJUSTABLE
FEET
INFRARED
REMOTE
RECEIVER
AIR INTAKE VENT
CARRYING
HANDLE
POWER CORD
CONNECTOR
Advertisement
Table of Contents
