Upgrading The Software - Samsung 6 Series User Manual

Upgrading the Software

Samsung may offer upgrades for TV's firmware in the future. Please contact the Samsung call center to receive information
about downloading upgrades and using a USB drive. Upgrades will be possible by connecting a USB drive to the USB port
located on your TV.
1.
Insert a USB drive containing the firmware upgrade into the WISELINK port
on the side of the TV.
Software can not be upgraded through the LAN connection.
➣
2.
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the ENTER
3.
Press the ▲ or ▼ button to select "Software Upgrade", then press the
ENTER button.
4.
Press the ENTER
The message "Scanning for USB... It may take up to 30 seconds." is
displayed.
5.
The message "Upgrade version XXXX to version XXXX? The system will be
reset after upgrade." is displayed.
Press the ◄ or ► to select the "OK", then press the ENTER
Please be careful to not disconnect the power or remove the USB drive while
upgrades are being applied. The TV will turn off and turn on automatically
after completing the firmware upgrade. Please check the firmware version
after the upgrades are complete. When software is upgraded, video and
audio settings you have made will return to their default (factory) settings. We
recommend you write down your settings so that you can easily reset them
after the upgrade.
button.
button.
button.
English - 66
TV Side Panel
USB Drive
AV Color System : Auto
PIP
Software Upgrade
Software Upgrade
Scanning for USB.....
It may take up to 30 seconds.
Software Upgrade
Upgrade version XXXX to version XXXX? The system will
be reset after upgrade.
OK Cancel
►