Connecting To A Computer - Sharp XV-Z3100U Operation Manual

Connecting to a Computer

When connecting a computer, ensure that it is the last device to be turned on after all the
connections are made.
Ensure that you have read the operation manuals of the devices to be connected before making
connections.
To RGB output terminal
Note
• See page 61 "Computer Compatibility Chart" for a list of computer signals compatible with the projec-
tor. Use with computer signals other than those listed may cause some of the functions to not work.
• A Macintosh adaptor may be required for use with some Macintosh computers. Contact your near-
est Macintosh Dealer.
• Depending on the computer you are using, an image may not be projected unless the
computer's external output port is switched on. (e.g. Press "Fn" and "F5" keys simultaneously
when using a SHARP notebook computer). Refer to the specific instructions in your computer's
operation manual to enable your computer's external output port.
26
Supplied
Computer
accessory
RGB cable
(commercially available)
To INPUT5 terminal