Connection To The Front Av2 Input Jacks; Connecting To The Monitor Output Jacks; Av Connection To The Aerial Socket - Sanyo CA29YS2S Instruction Manual

16
❒ Connecting To the Front AV2 Input Jacks
❒ Connecting To the Monitor Output Jacks
INPUT
AV1/DVD
C R
R
(MONO)
C
B
Y
VIDEO
To video and
audio inputs
VCR for Recording
❒ AV Connection To the Aerial Socket
The AV apparatus can also be connected to the aerial socket of your TV receiver.
Presetting to watch the video input
1. Playback the VCR .
2. Tune a VCR playback in programme position
that you want. (See Semi-Auto Tuning and
Manual Tuning on pages 11.)
For further details concerning this connection and adjustment, refer to the operating instructions
for the AV equipment.
It is convenient to use the AV input jack on the front panel for equipment
that is often connected and disconnected.
■
■
To watch the Front AV2 video
input picture, select AV2
position by pressing the TV/AV
Selector.
Video/DVD Player
MONITOR OUT
R
To Audio Output-R
L L
To Audio Output-L
V
I
D
To Video Output
E
O
AV2
The picture signal being displayed on the TV screen is
output through the Monitor Output Jacks. Use these
terminals to record TV broadcasts and for video dub-
bing from AV1 or AV2 input terminals.
■ To record TV programme, select TV mode by
■
pressing the TV/AV Selector and record the
desired programme.
■ To dub video from the AV1 terminal input, select
AV1 position and by pressing the TV/AV Selector.
Aerial Socket
15
TV mode
AV1
PLAYBACK
VCR for
playback