Advertisement
LCD monitor
81 cm (32") multimedia, HD Ready
Highlights
WXGA 1366 x 768 resolution
The wide format of XGA resolution LCD
panel is capable of displaying 1366 x 768 pixels;
WXGA allows monitors to be non-interlaced
to ensure a better display performance and
accurate colour display effect.
Zoom function for tiled matrix
The internal zoom function enables easy
implementation of a video wall matrix, without
the need for expensive external equipment.
Capable of a vidiwall of 25 displays by dividing
up to 5 displays each horizontally and
vertically.
HDMI input
HDMI makes an uncompressed digital RGB
connection from the source to the screen. By
eliminating conversion to an analogue signal, it
delivers an unblemished image. The non-
degraded signal reduces flicker and leads to a
clearer picture. HDMI intelligently
communicates the highest output resolution
with the source device. The HDMI input is fully
backwards-compatible with DVI sources but
includes digital audio. HDMI uses HDCP copy
protection.
SmartPower
The backlight intensity can be controlled and
pre-set by the system to reduce the power
consumption by up to 50%, which saves
substantially on energy costs.
Advanced anti-image sticking
Static images left on-screen for extended
periods of time may leave a "ghost image" or
image sticking effect on LCD displays.
Although image sticking on LCD displays is not
permanent, you want to prevent this
happening, especially in locations where
content is shown 24/7.
BDL3215E/00
Compliant with RoHS standards
Philips designs and produces display products
in compliance with strict Restriction of
Hazardous Substances (RoHS) standards that
restrict lead and other toxic substances that
can harm the environment.
Designed for 24/7 operation
Because business never sleeps, our signage
displays are designed for 24/7 use. Taking
advantage of superior components to ensure a
higher level of quality, you can count on this
range of models for complete around-the-
clock reliability.
Remote Management: RS232
Remote Management allows the user to
control and adjust the displays remotely via the
RS232 protocol. Using CEC commands, you
are able to have full control over all the
displays in your signage network at any time.
Advertisement
