Mounting
1 Align () with the shooting direction, and mount the camera
onto the ceiling
Mounting screw (not included)
Note
The diameter of the attachment hole is Φ 4.5 mm (3/16 inch).
Do not use flathead screws.
When using an impact screwdriver, do not tighten the screws fully.
Tighten using your hand instead. Failure to do so may damage the
outer case.
Align the () mark upwards when mounting the camera on the wall.
.
Adjusting images
After mounting is completed, adjust the images while checking the actual image.
"Adjusting Image" (A page 17)
.
Installation
15