Table of Contents
Advertisement
Names of Parts
1
2
3
1 Flash (for DZ-HS403 only) (p. 58)
2 Light receiving sensor
(for DZ-HS403 only)
This sensor controls the amount of light to be
emitted from the built-in flash. Take care not
to block with hand, etc. during recording.
3 Lens cap string attachment hole (p. 23)
4 Stereo microphone
Take care that the microphone is not blocked
by a hand, etc., during recording.
5 Recording indicator (p. 37, 43, 68)
The red indicator will light during recording.
6 Infrared receiver (p. 24)
When the remote control is used to operate
the DVD video camera/recorder, this
receiver will receive the infrared signal.
7 Optical 10× zoom lens
(for DZ-HS403 only)
Optical 15× zoom lens
(for DZ-HS401 only)
(p. 53)
18
4
5
6
11
12
13
(Inside the cover)
7
8
14
8 Lens hood (for DZ-HS403 only) (p. 54)
Always remove this lens hood when using
the optional tele-conversion or wide-
conversion lens.
9 Zoom lever (p. 53, 55, 73)
To adjust the zoom or volume.
10 Accessory shoe (for DZ-HS403 only)
The optional microphone can be attached
here. (See the instruction manual of device to
be attached for details.)
11 PC connection terminal (TO PC) (p. 127)
12 AV input/output jack (p. 116, 119)
13 External microphone jack (p. 70)
14 Wide-screen color liquid crystal display
(inside) (p. 34)
Although the external appearances of DZ-
HS403 and DZ-HS401 are different, the method
of operating these models is identical. DZ-
HS403 illustrations are used in this manual.
9
10
Advertisement
Table of Contents
