Epson PowerLite S8+ User Manual page 27

5. Connect the flat end of the cable to any available USB port on
your notebook or desktop computer.
Messages appear on your computer screen as the projector is
recognized and the software is installed automatically.
6. Follow the instructions on the screen to install the Epson USB
Display software. If you see a "Digital Signature Warning," select
or
Continue Continue Anyway
the first time you connect.)
After the software is installed, you see your computer's current
desktop displayed by the projector. You can switch the projector
to other image sources using the
button on the remote control or the projector.
7. You can connect an optional audio cable if you want to play
sound through the projector (see page 35).
When you've finished making connections, see Chapter 2 for
instructions on displaying and adjusting the image.
When you're done projecting from your computer, disconnect the
USB cable.
. (You see these instructions only
or
Source Search Search
note
If the software does not
install automatically, you
can install it manually.
Setting Up the Projector
27