Epson Stylus NX100 Service Manual page 101

Epson Stylus NX100/105/SX100/105/TX100/101/102/103/105/106/109/ME 300/ME OFFICE 360/NX110/115/SX110/115/TX110/111/112/113/115/117/119
Assemble the LD Roller Assy following the procedure below.
1. Install the Clutch while aligning the guide pin of the LD
Roller Shaft with the hole of the Clutch.
2. Install the Extension Spring between the hook of the LD
Roller Shaft and that of the Clutch.
3. Install the Combination Gear to the LD Roller Shaft.
LD Roller
Hook
Extension Spring
Figure 4-98. Assembling the LD Roller Assy (2)
When installing the Retard Roller to the Retard Roller Assy,
make sure to attach it with the arrow inside as shown below.
Retard Roller
Ejecting paper side
Figure 4-99. Assembling the Retard Roller Assy
DISASSEMBLY/ASSEMBLY
LD Roller Shaft
Guide pin
Positioning hole
Combination Gear
Hook
Clutch
Retard Roller Assy
Feeding paper side
Disassembling the Printer Mechanism
Whenever the ASF Unit is removed/replaced, the required
A D J U S T M E N T
R E Q U I R E D
adjustments must be carried out.
• Chapter 5 " ADJUSTMENT" (p.110)
Revision C
101
Confidential