Bosch DINION 5000 AN Quick Manual page 2

2 | DINION AN 5000
Ease of installation
The lens wizard helps focus the lens at the maximum
opening to ensure proper back-focus is maintained
throughout the 24-hour cycle. No special tools or
filters are required.
Six independent, pre-programmed operating modes
support typical applications, but are fully
programmable for individual situations. Switching
between modes is easy via Bilinx or the external alarm
input.
Several other features are available that make
installation easy:
• Power and alarm cable connectors which can be
removed even when the camera is mounted.
• A built-in test pattern generator produces signals to
test and fault-find cables.
• A multi-language On-Screen Display (OSD).
• A high efficiency power supply improves maximum
operating temperature
Cable compensation is used to avoid the need for
amplifiers in long distance coaxial connections up to
1000 m (3000 ft). It can prevent the image quality
degradation caused by signal losses from long cable
lengths.
Bilinx technology
Bilinx is a bidirectional communication capability
embedded in the video signal of this camera. Installers
can check status, change camera settings and even
update firmware from virtually anywhere along the
video cable. Bilinx reduces service and installation
time, provides for more accurate set-up and
adjustment, and improves overall performance. In
addition, Bilinx uses the standard video cable to
transmit alarm and status messages, providing
superior performance without additional installation
steps.
Ideal picture performance
There are many settings available to help fine-tune the
picture performance to match your installation
environment. These include:
• Smart BLC – automatically and dynamically
compensates for strong backlight
• Peak White Invert – reduces glare from highlight
areas
• Contrast and sharpness – enhance details in bright or
misty scenes
• SensUp – sensitivity is dramatically enhanced by a
factor of 10
• Default shutter – improves the motion performance in
auto exposure mode
• Dynamic noise reduction – dynamically reduces noise
in the picture
Privacy masking
Fifteen different privacy zones allow specific parts of a
scene to be blocked. Pre-program any part of the
scene to be masked.
Video Motion Detection
The built-in video motion detector allows you to select
four programmable areas with sensitivity thresholds.
When motion is detected, alarms can be displayed in
the video signal, the output relay can be closed or an
alarm message can be transmitted via Bilinx.
Typical applications:
• Entrance foyer or lobby with glare
• Outdoor perimeters
– low light
– IR light
• Traffic monitoring
– highway
– traffic intersections
– emergency response coordination
• Tunnels
• Car parks (outdoor)
• Restricted access locations such as:
– prisons
– ports / freight terminals
– military facilities
– border control and homeland
• Casino and gambling centers
Certifications and approvals
Standards FCC Part15 Subpart B, Class B
EN 55022 class B
EN61000-3-2
EN61000-3-3,
EN 50130-4
EN 50121-4
Camera with 500 g (1.1 lbs) lens
according to IEC 60068-2-6
VBN-5085-C11/ EN60950-1,
VBN-5085-C21 UL60950-1 (2
CSA C22.2 No. 60950-1-07 (2
edition)
VBN-5085-C51 EN60950-1
Product certifications CE, FCC, UL, cUL, C-tick
Marks CE, cULus, WEEE, PADS, RCM and China
RoHS
Region Certification
Europe CE
USA UL
FCC
Canada CSA
edition),
ND
ND