Security Codes - Sharp WX01SH Operation User's Manual

Security Codes
Handset Code and Administrator
Code are required for handset use;
save both codes beforehand.
Handset
Use or change some
Code
functions.
Administrator
Required for Reset
Code Settings and Reset All.
. Do not forget Security Codes.
. Do not reveal Security Codes. We are
not liable for misuse or damages.
. Guide descriptions are given
assuming that Handset Code and
Administrator Code are saved.
If Security Code is Unsaved
. Code setup message/window appears
whenever Security Code is required.
Incorrect Code Entry
. Message appears for incorrect code
entries; retry.
1-13
Saving Handset Code
Enter four to eight digits.
1
% S Settings S %
S f Phone/
2
Locks S %
Locks
Function Lock
Off
Application Lock
Off
Handset Code Setti. . .
Remote Lock
Administrator Sett. . .
◎
. Locks menu opens.
3
Handset Code Settings
S % S Save Handset Code
S %
4
Enter Handset Code to
save S %
5
Re-enter Handset Code to
save S %
Changing Handset Code
After 3, enter current Handset Code
S % S From 4
■Need/UnNeed Setting
For enhanced security, set Need/
UnNeed Setting to Need; then
Handset Code will be required to
delete all files/entries, etc.
. Guide descriptions are given
assuming that Need/UnNeed Setting
is set to UnNeed.
1
In Locks menu, Handset
Code Settings S %
2
Need/UnNeed Setting
S % S Need or UnNeed
S %
3
Enter Handset Code S %