Table of Contents
Advertisement
You see a screen like this:
6. Use your computer or wireless device to select the Wi-Fi network name (SSID) displayed on the
LCD screen, then enter the password shown.
7. Press the
You see the
from your computer or device, and then print. If you are printing from a computer, make sure you
installed the network software as described on the Start Here sheet.
Note: If you don't see the
name or entered the password incorrectly. Repeat these steps to try again.
Parent topic:
Related references
Status Icon Information
Related tasks
Entering Characters on the LCD Screen
Wi-Fi Protected Setup (WPS)
If your network uses a WPS-enabled wireless router or access point, you can quickly connect your
product to the network using Wi-Fi Protected Setup (WPS).
home button to exit.
icon on the LCD screen and should be able to connect to your product directly
icon on the LCD screen, you may have selected the wrong network
Wi-Fi Direct Mode Setup
55
Advertisement
Table of Contents
Need help?
Do you have a question about the WF-3820 Series and is the answer not in the manual?
Questions and answers
how to change printer settings example to landscape
when to change ink cartridge
The ink cartridge for the Epson WF-3820 Series should be changed immediately after removing the old one. If an ink cartridge is expended, a message will appear on the LCD screen indicating which cartridges need replacement. If replacing a cartridge before receiving a message, navigate to Maintenance > Ink Cartridge Replacement on the home screen and follow the on-screen instructions. It is recommended to leave old cartridges in the printer until ready to replace them to prevent the print head nozzles from drying out.
This answer is automatically generated
how to change printer name on Epson 3820 from incorrect printer name
How to print envelopes on an Epson WF-3820? I cannot find any tools