Kenwood Peek & View TTP310 Series Instructions Manual page 3

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
As with all new heating elements,
your toaster may emit a slight
burning smell when it is first
switched on. This is normal and not
a cause for concern.
key
warming rack
Peek & View™ carriage lever
(with 'Hi-Rise™' for extra lift)
crumb tray
browning control
button with indicator light
defrost button with indicator light
cancel button with indicator light
warming rack selector
cord storage
to use your toaster
1 Plug the toaster into the power
supply.
2 Move the browning control to the
desired setting. Use a low setting
for light toasting and for thin or dry
bread.
3 Insert the bread, muffins, bagels etc.
4 Lower the lever
'cancel' button will illuminate. (The
lever will not stay down unless the
toaster is plugged in).
To toast frozen bread, once the
bread is lowered press the 'defrost'
button. The 'defrost' button will
illuminate.
5 To toast a single slice of bread, place
the bread into the
the carriage lever and press the
button. The
button will illuminate.
Use the carriage lever to lift the toast
to Peek & View™ at any time
without cancelling the toasting cycle.
To stop toasting during the cycle,
press the 'cancel' button, the toast
will pop up and the 'cancel' button
light will go off.
6 Your toast will pop up
automatically, to raise it higher, lift
the lever.
until it locks. The
, lower
hints on using your
toaster
Select a lower setting for light
browning or for dry bread.
Dry/stale bread toasts more quickly
than fresh bread and thinly sliced
bread toasts more quickly than
thickly sliced bread. Therefore the
browning control should be set at a
lower setting than usual.
For best results ensure that the
bread slices are of an even
thickness, freshness and size.
In order to achieve uniform browning
we recommend you wait a minimum
of 30 seconds between each
toasting so that the control can
automatically reset. Alternatively
select a lower setting when
additional toasting is carried out.
warming rack safety
1 Never set the browning control
higher than
warming rack.
2 Never completely cover the warming
rack.
3 When using the warming rack, never
wrap the food up. Plastic wrapping
will melt and could catch fire. Foil will
reflect heat, damaging the toaster.
4 If you're using the toast slots, lower
the warming rack so it can't burn
you.
to use the warming rack
1 Raise the warming rack into position
by pressing down on the warming
rack selector
2 Put your food on top of the rack
(slicing thick items in half will speed
up the warming process).
3 Set the browning control no higher
than
. Lower the lever.
4 The lever will automatically rise at the
end of the warming cycle. Turn the
items over and repeat the operation.
Watch to make sure they don't burn.
3
when using the
.

Advertisement

Table of Contents
loading

Table of Contents