Sony ILCE-7M3 Service Manual
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. Digital Camera
  5. ILCE-7M3
  6. Service manual

Sony ILCE-7M3 Service Manual

Interchangeable lens digital camera
Hide thumbs Also See for ILCE-7M3:
Table of Contents

Advertisement

Quick Links

2018/05/02 02:55:03 (GMT+09:00)
SERVICE MANUAL
Ver. 1.1 2018.04
LEVEL 2
Note:
Be sure to keep your PC used for service and
checking of this unit always updated with the
latest version of your anti-virus software.
In case a virus affected unit was found during
service, contact your Service Headquarters.
[About the service of this model]
ILCE-7M3K is commodity that packed the Interchangeable Lens Digital Camera and Interchangeable Lens.
Refer to each following service manual the Interchangeable Lens kit, when you repair.
Model
ILCE-7M3
No supplied lens
ILCE-7M3K
SEL2870 (FE 28-70mm F3.5-5.6 OSS)
9-896-835-32
2018D33-1
©
Sony Imaging Products & Solutions Inc.
2018.04
ILCE-7M3/7M3K
Photo: ILCE-7M3 (Main body)
Lens
Service Manual of Lens
INTERCHANGEABLE LENS DIGITAL CAMERA
No supplied lens
9-834-758-[][]
US Model
Canadian Model
AEP Model
UK Model
Russian Model
E Model
Indian Model
Chinese Model
Korea Model
Tourist Model
SYS SET

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ILCE-7M3 and is the answer not in the manual?

Questions and answers

Related Manuals for Sony ILCE-7M3

Summary of Contents for Sony ILCE-7M3

  • Page 1 Refer to each following service manual the Interchangeable Lens kit, when you repair. Model Lens Service Manual of Lens ILCE-7M3 No supplied lens No supplied lens ILCE-7M3K SEL2870 (FE 28-70mm F3.5-5.6 OSS) 9-834-758-[][] INTERCHANGEABLE LENS DIGITAL CAMERA 9-896-835-32 2018D33-1 © Sony Imaging Products & Solutions Inc. 2018.04 SYS SET...
  • Page 2 Model No. WW541200 evaluative metering Ver. 2.31, MPF Baseline) compliant, Rated input: 7.2 V , 3.2 W [System] RAW (Sony ARW 2.3 format) Metering Range: –3 EV to +20 EV (at Operating temperature: Camera Type: ISO 100 equivalent with F2.0 lens) Movie (XAVC S format): 0 to 40°C (32 to 104°F)
  • Page 3 CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS REMPLACER CES COMPOSANTS QUE PAR DES PIÈCES SONY APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU PUBLISHED BY SONY.
  • Page 4 2018/05/02 02:55:03 (GMT+09:00) ILCE-7M3/7M3K 1. SERVICE NOTE 1-1. PRECAUTION ON REPLACING THE Update of MAC Address and Device Address SY-1086 BOARD When a board that contains Wi-Fi and Bluetooth has been replaced or when replacing a board that contains the main IC (CPU), the IC’s unique number (MAC address and device address) must be reloaded.
  • Page 5 2018/05/02 02:55:03 (GMT+09:00) ILCE-7M3/7M3K 1-2. PRECAUTION FOR REPLACEMENT 1-4. NOTES FOR REPLACING THE EVF OF THE MECHA DEVICE SERVICE DISPLAY DEVICE (LCD902) OR THE (IMAGER) SY-1086 BOARD Capture the data to PC from CD-ROM supplied with the mecha Adjustment values of each EVF display device (LCD902) are stored device service when it is ordered.
  • Page 6 2018/05/02 02:55:03 (GMT+09:00) ILCE-7M3/7M3K 1-5. CHECKING THE Wi-Fi FUNCTION Perform the following procedure to check the Wi-Fi function. Required equipment: Windows personal computer with Wi-Fi interface 1. Turn on the power of the unit. 2. Perform the following operations for the unit.
  • Page 7 2018/05/02 02:55:03 (GMT+09:00) ILCE-7M3/7M3K 2. DISASSEMBLY & ASSEMBLY OPERATION NOTES Make sure that the conductive side of a flexible board does not have any stain or foreign materials. Do not touch the conductive side of flexible boards with bare hands. Plug in a flexible board straight, fully into the connector until it reaches the end inside. (Fig. 1, Fig. 2, Fig. 3)
  • Page 8 2018/05/02 02:55:03 (GMT+09:00) ILCE-7M3/7M3K 2-1. CONSTITUTION DIAGRAM rear cabinet block VF block LCD panel block top cabinet block jack base R block JK-1022 flexible board SY-1085 board block SY M-frame B block BT block anti shake unit MB charge unit NFC base block...
  • Page 9 2018/05/02 02:55:03 (GMT+09:00) ILCE-7M3/7M3K 2-2. DISASSEMBLY • This set can be disassembled in the order shown below. 2-2-1. DISASSEMBLY FLOW MAIN UNIT 2-2-2. FRONT GRIP RUBBER (Page 2-4) 2-2-3. BOTTOM COVER, BOTTOM FRAME BLOCK (Page 2-4) 2-2-4. REAR CABINET BLOCK 2-2-9. GY-1008 BOARD...
  • Page 10 2018/05/02 02:55:03 (GMT+09:00) ILCE-7M3/7M3K Note: Follow the disassembly procedure in the numerical order given. 2-2-2. FRONT GRIP RUBBER top side front side 4 NFC performance sheet 2 adhesive sheets 3 NFC performance adhesive 1 front grip rubber 2-2-3. BOTTOM COVER, BOTTOM FRAME BLOCK 1 eight screws (M1.7...
  • Page 11 2018/05/02 02:55:03 (GMT+09:00) ILCE-7M3/7M3K 2-2-4. REAR CABINET BLOCK 4 four screws (M1.7 2 screw (BTITE (1.4 5 (CH))) 6 screw (M1.7 2.5) 5 Open the LCD panel. 7 Open three lids. 3 CV diopter adjust dial rear side 1 eye cup assy 9 screw (M1.7...
  • Page 12 2018/05/02 02:55:03 (GMT+09:00) ILCE-7M3/7M3K 2-2-5. LCD PANEL BLOCK 8 LCD panel block 6 two screws (M1.7 2.5) top side 6 two screws (M1.7 2.5) 7 Draw the LC-1039 flexible board out of the hole. front side – Front view – 2 claw...
  • Page 13 2018/05/02 02:55:03 (GMT+09:00) ILCE-7M3/7M3K 2-2-7. VF BLOCK 4 VF block 2 EVF flexible board 1 ES-1005 flexible board rear side 3 two hooks bottom side SYS SET...
  • Page 14 2018/05/02 02:55:03 (GMT+09:00) ILCE-7M3/7M3K 2-2-8. TOP CABINET BLOCK 3 two screws (M1.7 – Rear view – 3 screw (M1.7 3 screw (M1.7 2 SH-1022 flexible board 1 RL-1053 flexible board 7 top cabinet block top side 6 two screws (M1.7 2.5) rear side 4 Open the battery lid.
  • Page 15 2018/05/02 02:55:03 (GMT+09:00) ILCE-7M3/7M3K 2-2-9. GY-1008 BOARD 1 screw (M1.7 3 boss 4 hook 2 screw (M1.7 2.5) 7 GY-1008 board block 5 Lift up the GY-1008 board block. 3 boss rear side – Bottom view – bottom side 6 RL-1053 flexible board...
  • Page 16 2018/05/02 02:55:03 (GMT+09:00) ILCE-7M3/7M3K 2-2-10. CNT DIAL R B-ASSY 6 CNT dial R B-assy 1 gyro cushion T upper 3 CNT dial R hold plate 2 screw (M1.7 4 Turn over the flexible board. bottom side 5 boss rear side 2-2-11. CNT DIAL F B-ASSY 1 two screws (M1.7...
  • Page 17 2018/05/02 02:55:03 (GMT+09:00) ILCE-7M3/7M3K 2-2-12. RL BLOCK ASSY-1 • Continued on 2-2-13 (page 2-12). 1 Turn the switch to "OFF". 2 hook 4 screw (M1.7 6 three screws (M1.7 2.5) Note 1: Do not touch this part. 3 screw (M1.7 5 control switch block (EV62000)
  • Page 18 2018/05/02 02:55:03 (GMT+09:00) ILCE-7M3/7M3K 2-2-13. RL BLOCK ASSY-2 1 two screws (M1.7 2 screw (M1.7 3 eyelet plate G 5 eyelet G block 4 boss bottom side – Bottom view – rear side Note: Do not touch this part. 6 screw (M1.7 2.5)
  • Page 19 2018/05/02 02:55:03 (GMT+09:00) ILCE-7M3/7M3K 2-2-14. MODE DIAL BLOCK ASSY, CONTROL SWITCH BLOCK (EV62000) 1 two tapping screws (1.7 3 two screws (M1.7 2.5) rear side bottom side 4 Draw the flexible board out of the hole. Note: Take care not to damage the flexible board.
  • Page 20 2018/05/02 02:55:03 (GMT+09:00) ILCE-7M3/7M3K 2-2-16. EVF PROTECTOR 3 two screws (M1.7 1 Lift up the speaker block. bottom side 4 boss 2 two bosses 5 hook front side 8 two tapping screws (1.7 6 boss 7 hook qa boss qd EVF protector...
  • Page 21 2018/05/02 02:55:03 (GMT+09:00) ILCE-7M3/7M3K 2-2-17. SH FPC BASE BLOCK 5 two screws (M1.7 4 screw (M1.7 2.5) 7 SH FPC base block 1 SH protection sheet bottom side rear side 3 Peel off the MIS-2003 flexible board 6 Peel off the SH FPC base block from the SH core WP sheet B.
  • Page 22 2018/05/02 02:55:03 (GMT+09:00) ILCE-7M3/7M3K 2-2-19. MIS-2003 FLEXIBLE BOARD bottom side 2 four screws (M1.7 1 shoe cap rear side 5 shoe base B-assy 3 Draw the flexible board out of the hole. Note: Take care not to damage the flexible board. 4 MIS-2003 flexible board 2-2-20.
  • Page 23 2018/05/02 02:55:03 (GMT+09:00) ILCE-7M3/7M3K 2-2-21. SY-1086 BOARD BLOCK SY-1086 board 2 radiation sheet YM – – 1 rear muffle cushion B 4 GF sheet AS 3 SY PCB radiation sheet qf three screws (M1.7 2.5) qd JK-1021 GF sheet AS – –...
  • Page 24 2018/05/02 02:55:03 (GMT+09:00) ILCE-7M3/7M3K 2-2-22. SY M-FRAME B BLOCK 3 FP protection sheet (C) 4 four screws (M1.7 7 SY M-frame B block 5 Lift up the SY M-frame B block. 6 Draw the two flexible boards out of the hole. Note: Take care not to damage rear side the flexible board.
  • Page 25 2018/05/02 02:55:03 (GMT+09:00) ILCE-7M3/7M3K 2-2-24. IM IMAGER BLOCK, TEX-5300 1 Remove the ISL-2009 flexible board from two bosses. 2 Remove the ISP-2008 flexible board from two bosses. rear side ISP-2008 flexible board top side ISL-2009 flexible board 3 three IM imager fix shafts (M1.7 4.5)
  • Page 26 2018/05/02 02:55:03 (GMT+09:00) ILCE-7M3/7M3K 2-2-25. SHUTTER BLOCK top side 4 shutter block 3 MB jack shield block 1 screw (M1.7 2 three screws (M1.7 rear side 2-2-26. MB CHARGE UNIT, SHUTTER UNIT (AFE-3379) Hold here. shutter unit (AFE-3379) – Rear view –...
  • Page 27 2018/05/02 02:55:03 (GMT+09:00) ILCE-7M3/7M3K 2-2-27. JK BASE F BLOCK 3 MIC lid top side 2 JK base F block 1 two screws (M1.7 rear side 2-2-28. MB N FRAME BLOCK top side 2 MB N frame block rear side 1 four screws (P2 new truster M2 2-21 SYS SET...
  • Page 28 2018/05/02 02:55:03 (GMT+09:00) ILCE-7M3/7M3K 2-2-29. NFC BASE BLOCK top side 2 Remove the NFC base block in the direction of the arrow. 4 NFC base block 1 two screws (M1.7 2.5) rear side 3 connector 2-22 SYS SET...
  • Page 29 2018/05/02 02:55:03 (GMT+09:00) ILCE-7M3/7M3K 2-2-30. BT BLOCK top side 6 screw (M1.7 – Top view – DL-1004 flexible board 5 hook 5 hook 2 VG-1005 1 FP protection flexible board sheet (C) front side 4 two bosses 0 two tapping screws (1.7...
  • Page 30 2018/05/02 02:55:03 (GMT+09:00) ILCE-7M3/7M3K 2-2-31. MB N PLATE A, MB N PLATE SP 3 three screws (0+P1 M2 6) (SPIN) 1 N frame WP cushion 3 three screws (0+P1 M2 6) (SPIN) 4 MB N plate A 2 mount plate WP sheet...
  • Page 31 2018/05/02 02:55:03 (GMT+09:00) ILCE-7M3/7M3K 2-2-33. MB N CONTACT UNIT 3 two screws (M1.7 Note 1: Do not touch the contact portion. 5 MB N contact unit 4 Draw the flexible board out of the hole A and B. Note 2: Take care not to damage the flexible board.
  • Page 32 2018/05/02 02:55:03 (GMT+09:00) ILCE-7M3/7M3K 2-3. ASSEMBLY • This set can be assembled in the order shown below. 2-3-1. ASSEMBLY FLOW TOP COVER BLOCK 2-3-19. MIS-2003 FLEXIBLE BOARD 2-3-24. CONTROL SWITCH (Page 2-40) BLOCK (EV62000), MODE DIAL BLOCK ASSY (Page 2-44) 2-3-20. SH-1022 FLEXIBLE BOARD...
  • Page 33 2018/05/02 02:55:03 (GMT+09:00) ILCE-7M3/7M3K Note: Follow the assembly procedure in the numerical order given. 2-3-2. MB N CONTACT UNIT 3 two screws (M1.7 Note 1: Do not touch the contact portion. 1 MB N contact unit 2 Insert the flexible board into hole A, and Note 2: Take care not to damage the flexible board.
  • Page 34 2018/05/02 02:55:03 (GMT+09:00) ILCE-7M3/7M3K 2-3-3. MB LL BUTTON 3 MB LL button 4 MB LL pin 5 MB LL button block 2 MB lens lock spring Note: Apply grease to all surfaces. G-85 1 Apply grease G-85 front side bottom side 2-3-4. MB N PLATE SP –...
  • Page 35 2018/05/02 02:55:03 (GMT+09:00) ILCE-7M3/7M3K 2-3-5. MB N PLATE A marking position 1 MB N plate A 2 MB LL pin front side bottom side 3 screw 5 screw (0+P1 M2 6) (SPIN) (0+P1 M2 6) (SPIN) 8 screw 7 screw (0+P1 M2...
  • Page 36 2018/05/02 02:55:03 (GMT+09:00) ILCE-7M3/7M3K 2-3-6. MOUNT PLATE WP SHEET, N FRAME WP CUSHION 1 mount plate WP sheet : guide line MB N plate A pasting reference ditch front side ± 1 mm more than 1 mm bottom side mount plate WP sheet...
  • Page 37 2018/05/02 02:55:03 (GMT+09:00) ILCE-7M3/7M3K 2-3-7. BT BLOCK top side front cover block 4 boss coaxial cable (110 mm) setting hole 2 Insert the DL-1004 flexible board and into the hole. Note: Take care not to damage the flexible board. 3 Install the BT block in the direction of the arrow.
  • Page 38 2018/05/02 02:55:03 (GMT+09:00) ILCE-7M3/7M3K 2-3-8. NFC BASE BLOCK cable setting top side NFC base NFC cable cable setting – Inner view – 1 NFC base block BT block NFC cable NFC base 3 two screws (M1.7 2.5) rear side connector 2 connector –...
  • Page 39 2018/05/02 02:55:03 (GMT+09:00) ILCE-7M3/7M3K 2-3-10. JK BASE F BLOCK 1 MIC lid 3 three bosses top side 2 JK base F block 3 boss 4 two screws (M1.7 rear side 2-3-11. MB CHARGE UNIT Hold here. shutter unit (AFE-3379) – Rear view –...
  • Page 40 2018/05/02 02:55:03 (GMT+09:00) ILCE-7M3/7M3K 2-3-12. SHUTTER BLOCK 2 boss top side 2 boss 1 shutter block 3 MB jack shield block 5 screw (M1.7 4 three screws (M1.7 rear side 2-34 SYS SET...
  • Page 41 2018/05/02 02:55:03 (GMT+09:00) ILCE-7M3/7M3K 2-3-13. IM IMAGER BLOCK 3 Insert two pins (Ø 1.22 ± 0.01) into holes. Note 1: When install the spacer sheet to the imager and the optical filter block, install them so that the each centers are matched and top and bottom right and left become uniform.
  • Page 42 2018/05/02 02:55:03 (GMT+09:00) ILCE-7M3/7M3K 2-3-14. ANTI SHAKE UNIT tape (AS 1/2) : guide line – Rear view – – Top view – AS graphite sheet top tape (AS 1/2) : guide line – Rear view – AS graphite sheet top turn down...
  • Page 43 2018/05/02 02:55:03 (GMT+09:00) ILCE-7M3/7M3K 2-3-15. SY M-FRAME B BLOCK 5 FP protection sheet (C) 4 four screws (M1.7 : guide line FP protection sheet (C) 1 SY M-frame B block turn down 3 Install the SY M-frame B block. Note 2: Take care so that the flexible –...
  • Page 44 2018/05/02 02:55:03 (GMT+09:00) ILCE-7M3/7M3K 2-3-16. SY-1086 BOARD-1 • Continued on 2-3-17 (page 2-39). – Front view – 1 SY-1086 board 3 SY-1086 board block : guide line 7 Insert the three flexible boards and GF sheet LE into the hole of the SY-1086 board block.
  • Page 45 2018/05/02 02:55:03 (GMT+09:00) ILCE-7M3/7M3K 2-3-17. SY-1086 BOARD-2 – Rear view – – Type A – : guide line 3 radiation sheet YM SY-1086 board 0 to 1.0 mm 0 to 1.0 mm 0 to 1.0 mm 1 GF sheet AS – Type Y –...
  • Page 46 2018/05/02 02:55:03 (GMT+09:00) ILCE-7M3/7M3K 2-3-19. MIS-2003 FLEXIBLE BOARD 6 four screws (M1.7 bottom side 5 Apply the adhesive bond (B-40) to four screws (M1.7 B-40 B-40 Including coating area lower side. Note 2: Confirm that the adhesive bond does not protrude. If glue adheres bond to the flexible board, cabinet inner or appearance, wipe it off.
  • Page 47 2018/05/02 02:55:03 (GMT+09:00) ILCE-7M3/7M3K 2-3-20. SH-1022 FLEXIBLE BOARD – – 1 SH-1022 flexible board ± 0.5 mm 2 EV protection sheet : guide line 3 speaker block 4 Soldering. 4 Soldering. – – [red] [red] 6 Soldering. [black] 6 Soldering. 6 Soldering.
  • Page 48 2018/05/02 02:55:03 (GMT+09:00) ILCE-7M3/7M3K 2-3-21. SH FPC BASE BLOCK 4 two screws (M1.7 5 screw (M1.7 2.5) 2 SH FPC base block 1 SH core WP sheet A 3 boss 3 boss bottom side 0 to 0.5 mm 0 to 0.5 mm...
  • Page 49 2018/05/02 02:55:03 (GMT+09:00) ILCE-7M3/7M3K 2-3-22. EVF PROTECTOR 3 boss 1 EVF protector 4 adhesive tape 2 Insert the flexible board into the hole. Note: Take care not to damage the flexible board. 5 Install the EVF protector in the direction of the arrow.
  • Page 50 2018/05/02 02:55:03 (GMT+09:00) ILCE-7M3/7M3K Ver. 1.1 2-3-23. TOP L CONNECT PLATE BLOCK 1 top L connect plate 3 SP insulating sheet ± 0.5 mm 2 SP harness ± 0.5 mm 6 two screws (M1.7 2.5) protector 4 top L connect plate block ±...
  • Page 51 2018/05/02 02:55:03 (GMT+09:00) ILCE-7M3/7M3K 2-3-25. RL BLOCK ASSY-1 • Continued on 2-3-26 (page 2-46). Note: Do not touch this part. 4 screw (M1.7 2.5) 4 two screws (M1.7 2.5) hole 3 Align three holes with three bosses, and install the RL hole...
  • Page 52 2018/05/02 02:55:03 (GMT+09:00) ILCE-7M3/7M3K 2-3-26. RL BLOCK ASSY-2 Note 1: Do not touch this part. Note 2: Take care not to damage the flexible board. 2 EV WP sheet A 1 Paste the the EV WP sheet B. EV WP sheet B –...
  • Page 53 2018/05/02 02:55:03 (GMT+09:00) ILCE-7M3/7M3K 2-3-27. CNT DIAL F B-ASSY 3 two screws (M1.7 2.5) boss boss hole hole boss boss hole hole – Bottom view – 2-47 SYS SET...
  • Page 54 2018/05/02 02:55:03 (GMT+09:00) ILCE-7M3/7M3K 2-3-28. CNT DIAL R B-ASSY boss boss – Bottom view – Note: Take care so that the flexible board is not pinched. 2 boss 6 screw (M1.7 – Bottom view – 5 boss 5 boss 2-48 SYS SET...
  • Page 55 2018/05/02 02:55:03 (GMT+09:00) ILCE-7M3/7M3K Ver. 1.1 2-3-29. GY-1008 BOARD qa screw (M1.7 9 boss Note: Arrange the RL-1053 flexible 0 screw (M1.7 2.5) board inside the rib. 9 boss – Bottom view – 2-49 SYS SET...
  • Page 56 2018/05/02 02:55:03 (GMT+09:00) ILCE-7M3/7M3K 2-3-30. TOP CABINET BLOCK 1 top cabinet block top side 2 two screws (M1.7 2.5) (0.12 ± 0.01 rear side 3 Open the battery lid. 4 screw (M1.7 (0.12 ± 0.01 5 two screws (M1.7 – Rear view –...
  • Page 57 2018/05/02 02:55:03 (GMT+09:00) ILCE-7M3/7M3K 2-3-31. VF BLOCK 1 VF block 3 EVF flexible board 4 ES-1005 flexible board rear side 2 two hooks bottom side 2-3-32. JACK BASE R BLOCK 3 Attach the jack base R block in the direction of the arrow.
  • Page 58 2018/05/02 02:55:03 (GMT+09:00) ILCE-7M3/7M3K 2-3-33. LCD PANEL BLOCK 1 LCD panel block 3 two screws (M1.7 2.5) top side 3 two screws (M1.7 2.5) 2 Put the LC-1039 flexible board through the hole. front side – Front view – 7 claw 5 LC-1039 flexible board 6 rear FPC retainer block 8 screw (M1.7...
  • Page 59 2018/05/02 02:55:03 (GMT+09:00) ILCE-7M3/7M3K 2-3-34. REAR CABINET BLOCK 1 rear cabinet block rear side 5 Install the rear cabinet block in the direction of the arrow. 3 US lid 2 HP lid 4 RS-1010 flexible board top side rear side 8 two screws (M1.7 (0.12 ±...
  • Page 60 2018/05/02 02:55:03 (GMT+09:00) ILCE-7M3/7M3K 2-3-35. BOTTOM FRAME BLOCK, BOTTOM COVER 4 eight screws (M1.7 3 bottom cover 1 bottom frame block 2 rib 2 two ribs bottom side front side 2-54 SYS SET...
  • Page 61 2018/05/02 02:55:03 (GMT+09:00) ILCE-7M3/7M3K 2-3-36. FRONT GRIP RUBBER Note 1: Be careful not to cover the red frame area. : guide line – Front view – – Left view – – – grip adhesive 1 5 grip adhesive 5 grip adhesive 5...
  • Page 62 2018/05/02 02:55:03 (GMT+09:00) ILCE-7M3/7M3K 2-4. TORQUE VALUE OF OTHER SCREWS Tighten screws while referring to the torque values below for screws not indicated in “2-3. ASSEMBLY”. two tapping screws (1.7 KY block assy tapping screw (1.7 3.5) tapping screw (1.7 tapping screw (1.7 3.5)
  • Page 63 2018/05/02 02:55:03 (GMT+09:00) ILCE-7M3/7M3K plate assy (rear) screw (M1.7 2.5) clamp fixed plate jack base R assy two screws (M1.4 1.4 europe) three screws (M1.7 2.5) screw (M1.7 2.5) tripod screw AS-1005 board bottom FR B-assy two screws (M1.7 F tap plate two screws (M1.7...
  • Page 64 2018/05/02 02:55:03 (GMT+09:00) ILCE-7M3/7M3K 2-5. PASTING POSITION OF OTHER PARTS Work while referring to the information below for pasting position not indicated in “2-3. ASSEMBLY”. : guide line – – – – 0 to 0.5 mm 0 to 0.5 mm SY radiation...
  • Page 65 2018/05/02 02:55:03 (GMT+09:00) ILCE-7M3/7M3K Ver. 1.1 : guide line MIC grille assy MIC grille assy 0 to 0.5 mm 0 to 0.5 mm – – 0 to 0.5 mm RLS side WP cushion 0 to 0.5 mm 2-59 SYS SET...
  • Page 66 2018/05/02 02:55:03 (GMT+09:00) ILCE-7M3/7M3K 2-6. FLEXIBLE BOARD SETTING : Mountain fold : Valley fold [red] cable [black] 2-60E SYS SET...
  • Page 67 2018/05/02 02:55:03 (GMT+09:00) ILCE-7M3/7M3K 3. EXPLODED VIEWS Note: The components identified by mark 0 or dotted line with • -XX and -X mean standardized parts, so they may have some dif- mark are critical for safety. ference from the original one. Replace only with part number specified.
  • Page 68 2018/05/02 02:55:03 (GMT+09:00) ILCE-7M3/7M3K 3-2. REAR CABINET SECTION-1 not supplied rear side Refer to rear cabinet section-2. Refer to panel module section. front side Ref. No. Part No. Description Ref. No. Part No. Description 4-729-651-01 REAR MUFFLE CUSHION A (62200) 4-729-639-01 JOY BASE PLATE (62000) 2-635-562-01 SCREW (M1.7) (L = 2.0 mm)
  • Page 69 2018/05/02 02:55:03 (GMT+09:00) ILCE-7M3/7M3K Ver. 1.1 3-3. REAR CABINET SECTION-2 121 122 not supplied rear side front side Ref. No. Part No. Description Ref. No. Part No. Description 4-729-650-01 MEDIA BASE BLIND SHEET (62200) A-2199-687-A SERVICE (62000), KY BLOCK ASSY 4-594-916-01 GASKET S...
  • Page 70 2018/05/02 02:55:03 (GMT+09:00) ILCE-7M3/7M3K 3-4. PANEL MODULE SECTION LCD901 rear side front side Ref. No. Part No. Description Ref. No. Part No. Description X-2593-924-1 PLATE ASSY (799), (REAR) 4-684-435-12 SHEET (FRONT (799)), ANTI DUST 4-287-435-11 SCREW (M1.4 EUROPE) TYPE (L = 1.4 mm)
  • Page 71 2018/05/02 02:55:03 (GMT+09:00) ILCE-7M3/7M3K 3-5. VF BLOCK SECTION Refer to top cabinet section-1. front side LCD902 supplied Refer to main board section. rear side (Note) (Size 10.6 12.0 mm) Note: When replacing Ref. No. 203, cut the new part to the specifi c size indicated in the fi...
  • Page 72 2018/05/02 02:55:03 (GMT+09:00) ILCE-7M3/7M3K 3-6. TOP CABINET SECTION-1 RL-1053 flexible board bottom side front side rear side Refer to top cabinet section-2. Ref. No. Part No. Description Ref. No. Part No. Description A-2199-682-A SERVICE (620), CNT DIAL R B-ASSY 4-729-599-01 EV WP SHEET B (62000)
  • Page 73 2018/05/02 02:55:03 (GMT+09:00) ILCE-7M3/7M3K 3-7. TOP CABINET SECTION-2 MIC902 MIC901 SP901 Ref. No. Part No. Description Ref. No. Part No. Description A-2092-366-A MIS-2003 FLEXIBLE BOARD, COMPLETE 1-848-550-11 CABLE X-2594-584-1 SHOE BASE ASSY (799) 4-729-575-01 SH FPC BASE (62000) 1-493-293-21 SWITCH BLOCK, CONTROL (EV62000)
  • Page 74 2018/05/02 02:55:03 (GMT+09:00) ILCE-7M3/7M3K 3-8. MAIN BOARD SECTION front side 358 359 BT1001 (Note) 361 370 BH1001 (Note) AS-1005 board : BT1001 (LITHIUM SECONDARY BATTERY) rear side Board on the mount position. (See page 5-10 of Level 3) Note: Replace the battery socket (Ref. No. BH1001) together when replacing the lithium secondary battery (Ref.
  • Page 75 2018/05/02 02:55:03 (GMT+09:00) ILCE-7M3/7M3K 3-9. MECHA DEVICE SECTION front side Refer to front cover block section. (Note 1) Refer to MB N frame unit section. not supplied (Note 2) 404 411 not supplied (Note 2) not supplied (Note 2) Refer to anti shake unit section.
  • Page 76 2018/05/02 02:55:03 (GMT+09:00) ILCE-7M3/7M3K 3-10. ANTI SHAKE UNIT SECTION rear side not supplied (Note 1) not supplied (All mounted parts and IS-1033 complete board are not supplied, but they are included in mecha device service (5500) (Ref. No. 401).) (Note 2) front side Note 1: Refer to “5.
  • Page 77 2018/05/02 02:55:03 (GMT+09:00) ILCE-7M3/7M3K Ver. 1.1 3-11. FRONT CABINET BLOCK SECTION not supplied front side not supplied ANT901 Refer to BT block section. rear side Ref. No. Part No. Description Ref. No. Part No. Description 2-635-562-71 SCREW (M1.7) (L = 4.0 mm)
  • Page 78 2018/05/02 02:55:03 (GMT+09:00) ILCE-7M3/7M3K 3-12. BT BLOCK SECTION rear side front side Ref. No. Part No. Description Ref. No. Part No. Description A-2179-097-A BT SOLDER A-2179-109-A GY-1014 BOARD, COMPLETE (SERVICE) (BT-2019 FLEXIBLE BOARD, COMPLETE) 4-692-149-01 CUSHION (799), GYRO 4-692-150-01 PLATE (799), VG REAR RETAINER...
  • Page 79 2018/05/02 02:55:03 (GMT+09:00) ILCE-7M3/7M3K 3-13. MB N FRAME UNIT SECTION not supplied not supplied rear side not supplied not supplied front side (Note) Note: The mecha device service (5400) (Ref. No. 401) includes a protective MB body cap. Ref. No. Part No.
  • Page 80 2018/05/02 02:55:03 (GMT+09:00) ILCE-7M3/7M3K 4. SUPPLIED ACCESSORIES Note: • Items marked “*” are not stocked since they are seldom required for routine service. Some delay should be anticipated when ordering these items. The components identified by mark 0 or dotted line with mark are critical for safety.
  • Page 81 2018/05/02 02:55:03 (GMT+09:00) ILCE-7M3/7M3K 5. CLEANING Preparation for Remedy Cleaning Procedure for the OLPF If you use the CCD cleaning Jig (New) (J-6082-663-A) below, make 1. Clean up the tip of CCD cleaning jig. sure to clean the Tip of the CCD cleaning jig below before using.
  • Page 82 2018/05/02 02:55:03 (GMT+09:00) ILCE-7M3/7M3K 6. ADJUSTMENT For adjusting this models, the Adjust manual and the Adjust station are required. Adjust station It is the software to start up Adjust manual for each model. The installer of the Adjust station and the installation manual are attached, be sure to confirm the contents of them.
  • Page 83 2018/05/02 02:55:03 (GMT+09:00) ILCE-7M3/7M3K Revision History Ver. Date History Contents 2018.03 Official Release — 2018.04 Revised-1 • Change of “2. DISASSEMBLY & ASSEMBLY” (Page 2-44, 2-49, 2-59) • Change of repair parts (Page 3-3, 3-11) SYS SET...

This manual is also suitable for:

Ilce-7m3k

Table of Contents

Save PDF