Operating Elements - Infors HT Multitron Standard Operating Manual

6.3.1

Operating Elements

Operating ele- Designation
ment
On/Off button
F button
FT button
Plus button
Minus button
17 March 2021
Function
The On/Off button is used to control the following functions:
Switching the device from stand-by mode to active mode.

Activating/deactivating the selected parameter.

The F button can be used to select the device's parameters one after
the other so that they can be adjusted and activated as necessary.
The FT button can be used to select the device's parameters one after
the other so that they can be adjusted for the next phase. The FT but-
ton is only ever used in conjunction with the timer function.
The Plus button increases the values of the parameter setpoints or
the time of the timer function.
When the button is keeping pushed, the display runs up the specified
value range in increasingly large intervals.
The Minus button decreases the values of the parameter setpoints or
the time of the timer function.
When the button is keeping pushed, the display runs down the speci-
fied value range in increasingly large intervals.
Multitron Standard - Operating Manual
Operation
Page 61 of 114