Bluetooth Connection; Bluetooth Pairing - Sharp HP-TW10 Operation Manual

Bluetooth connection

Notes:
● These earbuds have touch pads
(MFB - Multi Function Button). Touch
it to operate.
● R or L earbud can be used
independently.

Bluetooth pairing

„
Touch and hold the MFB pad for about
2 seconds to power on and it will auto
reconnect to the bluetooth enabled
device that was last connected.
If there is no paired record, it will
automatically enter pairing mode after
power on. Turn on your Bluetooth
device and search for "HP-TW10
SHARP"
SETTING
BLUETOOTH
HP-TW10 SHARP
Touch and hold the pad for more than 5
seconds to turn it off.
The earbuds will automatically power
off if there is no connection after 5
minutes.
E-11